Skip to the content

Pre-call check

Test your speaker, webcam and mic in about a minute before Teams, Zoom or Meet. One plain answer: ready or not. Nothing is uploaded.

  • Nothing is stored or uploaded
  • Free, no sign-up, nothing to install
  • Chrome, Edge, Firefox and Safari
  1. Speaker
  2. Microphone
  3. Camera

Can you hear this?

Turn your sound up to a normal level, then play the test sound.

Did you hear it?

This check runs in your browser. The 3 seconds of sound it plays back stay in this page and are gone when you leave. Nothing is stored or uploaded.

The pre-call check lets you test your webcam and mic, and your speaker too, one step at a time. Then it tells you in one line whether you’re ready for your call. It takes about a minute, runs in any current browser and doesn’t need Teams, Zoom or anything else installed. If one part isn’t right, the answer says which and what to do about it.

How to test your webcam and mic before a call

Run the check on the device you’ll join from, wearing the headset or earbuds you’ll use, sitting where you’ll sit. It goes through three steps in order, and each one asks for only what it needs. The check asks for the microphone and the camera separately, each with a line saying why. That way you’re never faced with a browser question about both at once.

Three numbered steps in a row, speaker, then microphone, then camera, with arrows leading to a single result box showing the three possible answers.
One device at a time, about a minute in all, ending in one answer: ready, nearly ready or not ready.

First, can you hear?

Turn your sound up to a normal level and press Play the test sound. You’ll hear three soft rising notes, played twice. The page makes the sound itself, so it reaches you through whatever your device is set to play through right now. Then answer Did you hear it? If you expected it in your headset and it came out of the laptop, that’s worth knowing now rather than when the meeting starts.

Then your mic: speak and listen back

Press Allow the microphone and choose Allow when your browser asks. Talk as you would on a call; the bar moves when the microphone hears you. The page keeps your last 3 seconds of sound, so after a moment press Play back the last 3 seconds and listen. Then answer Did you hear yourself clearly? If you have more than one microphone, choose the one you’ll use from the list first. On an audio-only call with no need for the mic here, you can carry on without it.

This step leaves on the echo cancelling, noise suppression and automatic level that browsers apply for calls. So what you hear back is close to what people on a call will hear.

Last, your camera: see yourself

Press Allow the camera and allow it in the browser. Check your face is in the picture and lit from the front. If the picture is too dark, the check says so while you look, so you can turn on a lamp and watch it improve. Answer Can you see yourself clearly?, or skip the camera if it’s an audio call.

What your result means

At the end you get one answer, and under it a line for each part: speaker, microphone and camera, with what worked as well as what didn’t. Each part that needs work has a button to check it again, so you don’t have to start over.

  • Okay: “You’re ready for your call”. You heard the test sound, the microphone picked you up and you heard yourself clearly, and you could see yourself in a bright enough picture. The result lists parts you skipped as skipped, not as faults.
  • Check this: “You’re nearly ready: check 1 thing” (or 2). Everything works, but the microphone is too loud and may crackle, or the picture is dark. You can still join your call; the note beside the part says what would make it better.
  • Not ready for your call: at least one part needs attention before you join. You didn’t hear the test sound, the microphone heard nothing or you didn’t hear yourself clearly, the picture was black or you couldn’t see yourself, or the browser couldn’t use a device at all. The line beside it says why.
The pre-call check’s result: speaker and camera ticked, microphone crossed, the answer Not ready for your call, and a line for each part saying the microphone was connected but heard nothing.
Each part gets its own line. Here the speaker and camera passed and the microphone was silent, so the answer is Not ready for your call.

How it decides: you answer for the speaker, and for what you hear and see. The microphone also has to pick up sound louder than 50 dB below the top of the scale. If the sound reaches 99% of the top three or more times, the check calls it too loud. It calls the camera’s picture dark when its average brightness is below 20%. These are starting values measured in this browser, and they’re shown under How this check decides.

When to run it

Ten minutes before a call is about right: long enough to fix a muted headset or swap to another microphone, short enough that nothing changes in between. For a job interview, an exam or anything you can’t rejoin easily, run it the day before as well. Do it at the same time of day, so you see the light you’ll really have.

Run it again whenever something has changed: a new headset, a different room, a docking station, or a computer that has just installed updates. Updates and new devices are when a call app quietly picks a different microphone or speaker.

Teams, Zoom and Meet have their own tests: here’s what each one does

The big call apps each have a way to check your devices, and they’re worth using. They test inside the app, with the app’s own choice of microphone and camera. This check tests the devices themselves in your browser. They answer slightly different questions, and between them they find almost everything.

The Teams test call

To make a test call in Teams, select the three dots next to your profile picture, then Settings, then Devices, then Make a test call. Teams asks you to record a short message and plays it back, and Microsoft says the recording is deleted straight after the call. The catch is where it works: Microsoft’s page on how to make a test call says it’s only available in the Teams desktop app for Windows and Mac.

So if you join Teams in a browser, on a phone, or on a computer where you can’t install the app, there’s no Teams test call to make. That’s the gap this check fills: it runs in the same browser you’ll join from, on a computer or a phone.

The Zoom test meeting

Zoom’s test meeting is at zoom.us/test. Press Join and it opens the Zoom app, offers to download it if you don’t have it, or lets you join from your browser if you can’t install it. It then walks you through your speaker and microphone inside Zoom. In the desktop app you can also check without a meeting: click your profile picture, then Settings, then Audio, where Test speaker and Test microphone are.

Google Meet’s check before you join

Meet doesn’t have a test call. What it has is the screen before you join, which Google calls the green room. There you see yourself in a preview, the mic bar moves when your microphone hears you, and you can play a test sound and pick other devices from the drop-down lists. Google describes it on its page about how to connect your video and audio. It’s a good last look, but it doesn’t let you hear yourself back.

Why test outside the app too

When a call goes wrong, the first question is whether it’s the device or the app. A pass here answers it: the speaker, microphone and camera all work, your system lets the browser use them, and the problem is the app’s own settings. That saves a lot of unplugging and restarting things that were never broken.

A chain of boxes from your devices to system settings to the browser, bracketed as what this check covers, then the call app and the internet connection drawn dashed as outside it.
The check proves your devices, your system’s settings and the browser’s permission. The call app’s own choice of devices and your internet connection are outside it.

Before a Teams meeting

If you’re wondering how to test audio before a Teams meeting, and especially if you join from a browser, run this check first, then look at Teams’ own choice of devices. In the desktop app that’s the three dots next to your profile picture, then Settings, then Devices, where the speaker, microphone and camera each have a list. During a meeting, the arrow next to Mic, then More audio settings, lets you switch microphone or speaker without leaving.

If this check passes and people still can’t hear you in Teams, the microphone is fine and Teams is using another one, or has it muted. Our guide for when your mic works here but not in Teams goes through it.

Before an interview, an exam or a verification call

Getting ready for a video call that matters is mostly about the room. Sit facing the light, not with a window behind you. Raise the camera to eye level, even if that means a laptop on a stack of books. Pick the quietest room you can and close the door. Wear the headset you tested with, and charge it.

Side view of a person at a desk wearing a headset, facing a laptop raised on books so its camera is at eye level, with a lamp behind the laptop shining towards them.
Headset on, camera at eye level, light coming from in front of you. Run the check set up exactly like this.

For an online exam or an identity check, this tells you your devices work, but the exam’s or the service’s own check still decides. Those often need a particular browser, an extension or an app, so run their check too, and do it the day before.

If a step fails

You didn’t hear the test sound

Check the volume first, then where the sound is going. With headphones plugged in or earbuds connected, sound may go to them, or it may still go to the speakers; your system’s sound output setting decides. If you’re not sure which is working, test your speakers or headphones left and right on their own.

Your mic is silent, too loud or unclear

Silent usually means a mute switch on the headset or the input level turned right down in your sound settings. Too loud means turning that level down a little. Unclear, where the microphone hears you but you didn’t like the playback, often means the wrong microphone, such as a laptop’s built-in one across the desk: try another in the list. The full mic test with level meter and microphone choice goes into each of these. If the mic is fine here but not in your app, see mic not working in Zoom or others can’t hear you on Discord.

Your camera is dark, black or blocked

Dark is the light: face a window or a lamp. Black means something is over the lens, often a privacy shutter or a camera key on the keyboard. If the camera couldn’t be started, another app is probably using it, so close other call apps and tabs. The full webcam test with picture size and frame rate has more, and if Meet can’t see the camera, see camera not found in Google Meet.

The browser or system blocked access

If you chose Block once, or your system’s privacy settings keep the browser away from the microphone or camera, the check shows the steps for your own browser and system. Then it lets you try that part again. The full steps for every browser are in our guide to allow your microphone and camera.

What this check doesn’t test

It doesn’t test your internet connection. Nothing connects to anyone, so it can’t tell you whether your Wi-Fi will hold up, or how fast it is. Zoom’s test meeting does go through Zoom’s servers, so it’s the better check for that side of things.

It also can’t see the settings inside your call app, so it can’t tell which microphone Teams or Zoom will pick. It doesn’t detect echo or measure background noise, though you’ll hear both in the playback. And it doesn’t place a call: it’s a check of your devices, not a test call.

Your privacy

The check runs entirely in your browser, and nothing is stored or uploaded. The microphone step keeps the last 3 seconds of sound in the page so you can play them back, and the camera’s picture goes no further than your screen. When you leave the page, the microphone and camera are switched off and the sound is gone. See how the tests handle your data.

Questions

Does this test my internet connection?

No. It checks your speaker, microphone and camera on this device, and nothing is sent anywhere, so it can’t measure your connection. If you’re worried about your connection, Zoom’s test meeting at zoom.us/test goes through Zoom’s own servers.

Do I need to install anything or sign in?

No. It runs in a current version of Chrome, Edge, Firefox or Safari, on a computer or a phone, with no account. That’s the main difference from the Teams test call, which needs the desktop app.

Why does it ask for the microphone and the camera separately?

So you know what each one is for before your browser asks, and so a problem with one doesn’t stop you checking the other. If the camera is blocked, you’ll still know your microphone works.

Can I skip the camera for an audio-only call?

Yes. Press Skip the camera and the result lists it as skipped rather than failed. You can also carry on without the microphone if you only want to check the other parts.

Why start with the speaker?

Because not hearing the other people is half of what goes wrong on a call, and it needs no permission, so it’s the quickest place to start. It also means your sound is working before you listen back to your own voice in the microphone step.

Is anything recorded?

Only the last 3 seconds of sound, kept in the page so you can hear yourself back. It isn’t saved or uploaded, and it’s gone when you leave the page. The camera picture isn’t kept at all.

Why can’t I find the test call in Teams?

Microsoft says the test call is only in the Teams desktop app for Windows and Mac. If you use Teams in a browser or on a phone, it isn’t there. In the desktop app, look under the three dots next to your profile picture, then Settings, then Devices.

Can I use it before a job interview or an exam?

Yes, and it’s worth running the day before as well as just before. It tells you your devices work. An exam or an identity check may have its own system check with its own requirements, and that one still decides.

The check passed, but people still can’t hear me. Why?

A pass means the microphone works and your browser can use it. The call app chooses its own microphone and has its own mute, so check its audio settings next. Our guides for Teams, Zoom and Discord go through each one.