This test needs a mouse and a computer
It reads the buttons and wheel of a mouse, which a phone or a tablet's touch screen doesn't have. Open this page on a computer with a mouse connected.
These tests work on this device:
Below is a preview of the test as it looks on a computer.
Press each button inside this box. Its right-click menu is switched off here only.
Back and Forward are held back while the pointer is in the box. If your browser still asks whether to leave the page, choose to stay.
0 of 5 buttons have responded
- Left not yet
- Right not yet
- Middle (wheel click) not yet
- Back not yet
- Forward not yet
Not every mouse has Back and Forward. If yours doesn't, press “That's every button” and they won't count against it.
The answer appears here once every button has responded, or when you press “That's every button”.
How this test decides
A button counts as soon as the browser reports it pressed inside the box. Left, right and the wheel click are needed for an Okay. Back and Forward count only once one of them has responded: that shows your mouse has them, so then both are needed.
While the pointer is in the box, the test stops Back and Forward from leaving the page where the browser allows it. Some browsers and some mouse software act on them before the page hears about them, and a few older browsers report them as the wheel click.
This test runs in your browser. Nothing is stored or uploaded.
How to test your mouse buttons
This mouse test checks the five standard buttons one at a time: left, right, the wheel click, Back and Forward. It’s an online mouse tester that runs in your browser, so there’s nothing to install, and it finishes with a plain answer that names any button that didn’t get through. It checks whether each click registers, not how fast you click.
- Move the pointer into the box with the drawing of the mouse. Presses only count inside it.
- Click the left button, then the right. The right-click menu is switched off inside the box, so nothing pops up.
- Press the wheel straight down until you feel it click. Don’t turn it: turning belongs to the scroll wheel test.
- Press Back and Forward, the two buttons on the side under your thumb. The test holds them back while the pointer is in the box, so they shouldn’t take you off the page. If your browser asks whether you want to leave, choose to stay.
- Each button lights up on the drawing and its line in the list changes to “responded”. Once all five have, the answer appears by itself. If your mouse has no side buttons, press That’s every button.
While you hold a button down, its line reads “held now”. That’s handy if a button lets go on its own halfway through a drag: hold it, wiggle the mouse a little, and watch whether the line drops back while your finger is still down.
Use the mouse the way you normally do, on the same desk and through the same port. If the fault only shows up after the mouse has been in use for an hour, test it then, not first thing in the morning.
What the mouse test answer means
A button counts as soon as the browser reports it pressed inside the box. Left, right and the wheel click are needed for an Okay. Back and Forward are handled differently, because plenty of mice don’t have them: they count only once one of them has responded. That shows your mouse has side buttons and your browser passes them on, and from then on both are needed.
- Okay: “All 5 buttons responded”, or, on a mouse without side buttons, “All three main buttons responded”. Every button the test could count reached the browser.
- Check this: “1 button did not respond”, and the button named is the wheel click, or one side button when the other one worked. Some mice have no wheel button, so the test can’t be sure. Press it again, firmly, inside the box before you decide the switch is worn.
- Not working: the left or right button never reached the browser. Every mouse has both, so a missing one can’t be put down to the mouse’s design. Check the software and settings below first; if they’re clean, the switch under that button is the likely culprit.

The side-button rule is there so a plain three-button office mouse isn’t marked down for something it was never built with. The other side of it: if Back works and Forward doesn’t, the test knows your mouse has side buttons and treats the silent one as a problem worth a second look.
The five mouse buttons, and what each one does
Browsers give each button a number: 0 for the main button, 1 for the wheel, 2 for the right button, 3 for Back and 4 for Forward. That numbering is set out on MDN, and it’s what the test reads. It also explains a couple of the odd results people run into.

Left and right click
These two do almost all the work, so they wear first. The browser doesn’t really know which button is physically on the left. It knows which one the system calls the main button. If you’ve swapped them for left-handed use, the button under your right index finger will light up as Left in the test, and that’s correct.
A left click that needs a hard press, or works only some of the time, is a common complaint. It usually points to the switch under the button rather than anything in the computer, and the test will show it plainly: press gently a few times and watch whether the button lights every time.
The wheel click (middle mouse button)
For a middle mouse button test, press the wheel straight down without turning it. In a browser that click opens a link in a new tab or closes a tab you click on, and on many Linux desktops it pastes whatever text you last selected. The switch sits under the wheel, so it takes a firmer push than the main buttons.
Some wheels also tilt left and right for sideways scrolling. Lean on one of those while you press and it can tilt instead of click, so press from directly above. A few cheap mice have no wheel switch at all, which is why a silent wheel click gets Check this rather than Not working.
Back and Forward side buttons
This part of the test is the mouse side button test. In a browser, Back and Forward move through the pages you’ve visited, and in File Explorer on Windows they move through folders. Elsewhere they often do nothing at all unless an app or the mouse maker’s software gives them a job.
They are also the buttons most likely to be caught before the page hears them. Mouse software can take them over, and some browsers act on them first. Safari on a Mac is the well-known case: WebKit’s own bug tracker records it reporting side buttons as a wheel click, and Apple’s Safari 26.4 release notes (March 2026) list proper support for the extra buttons as new. On an older Safari, if pressing Back lights up the wheel click instead, that’s the browser, not your mouse. Try the test in another browser to be sure.
When a mouse button doesn’t respond
Most searches about this start with one specific button: mouse back button not working, mouse middle click not working, left click cutting out mid-drag. Before you blame the switch, rule out the layers between your finger and the browser. A press passes through the mouse’s own firmware, any software from its maker, and the system’s settings before a web page ever sees it, and each of those can change what arrives.

Is it the mouse or the software?
Start with the maker’s app if you have one: Logi Options+, G HUB, Razer Synapse and their like all let you give a button a different job, such as a keystroke, a gesture or a DPI change. A side button set to change DPI will never show up here, because the browser receives the DPI change, not a click. Put the button back to its default, then test again.
Then check the system. On Windows 11, open Settings, then Bluetooth & devices, then Mouse, and look at Primary mouse button; Microsoft’s own page walks through the rest of that screen. On a Mac, the Mouse pane in System Settings holds the equivalent options.
If both are clean, change one thing at a time. Plug the mouse or its receiver straight into the computer rather than a hub or a monitor’s USB port. Charge it or fit a fresh battery if it’s wireless, and bring the receiver closer. Then try the mouse on a second computer, and a second mouse on yours. If the dead button follows the mouse, it’s the mouse. If it stays with the computer, it’s software or settings.
Worn and dirty switches
Under each button sits a small switch, about the size of a fingernail, with a springy metal leaf inside. Each press snaps that leaf against a contact. Over millions of clicks the leaf tires and the contacts tarnish or collect grime, and the switch starts to misbehave. It can go quiet, so a click you hear and feel doesn’t register. More often it chatters, sending two clicks for one press.

Chatter is the more common failure, and it’s a different test. If your mouse opens files when you meant to select them, or drops what you’re dragging, check whether your mouse double-clicks by itself. For what to do next, from cleaning to a warranty claim, see our guide, mouse double-clicking by itself: causes and fixes.
A few short bursts of compressed air into the gap around the button sometimes bring a switch back for a while. If the mouse is still under warranty, a button that doesn’t register is a fault worth raising with the seller or the maker. Replacing the switch itself means desoldering it from the board, which is a fair job on a mouse you’re fond of and rarely worth it on a cheap one.
What this mouse test can’t measure
Two of the most common things people type after “mouse test” are DPI and polling rate. This test measures neither, and here’s why.
A web page never talks to the mouse. It gets events from the browser, after the system has already done its work on them: scaled the movement, applied pointer acceleration and, in current browsers, often bundled several movements together before handing them over. DPI is a property of the sensor, counted in its own steps, and the page only ever sees pointer movement in screen pixels after all that processing. Polling rate is how often the mouse reports to the computer, and the page sees the browser’s timing, not the mouse’s. Any figure built from those events would be a guess wearing a number.
The same goes for click speed and latency. Times are as your browser reports them, which is fine for comparing two presses (the double-click test relies on exactly that) but not for a lab figure. This page also counts only the five standard buttons. Extra buttons on a gaming mouse usually send keystrokes, set in the maker’s software, so they show up as keys rather than mouse buttons.
Finally, one run is one moment. A button that cuts out once an hour can pass a two-minute test. If you suspect that, leave this page open and come back to it when the fault has just happened.
More mouse tests
Each mouse fault gets its own test, so none of them has to guess. If the buttons all respond but clicks land twice, run the double-click test: 50 clicks, and it catches any pair too close together for a finger. If the page jumps while you scroll, test the scroll wheel notch by notch. And while you’re checking your desk, you can test your keyboard the same way. The fix guides pick up where a test leaves off.
Questions people ask about the mouse test
Does this work on a laptop touchpad?
Partly. A touchpad’s click and, with the usual settings, its two-finger click reach the browser as left and right, just like a mouse’s, so you can check those. A touchpad has no wheel button or side buttons, so press “That’s every button” and expect the wheel click to come back as Check this. On a phone or tablet the test explains that it needs a mouse and a computer.
Can this mouse test check my DPI or polling rate?
No. A web page sees pointer movement after the system has scaled and smoothed it, and event times as the browser reports them, so neither number can be measured honestly from here. The maker’s own software is the place to read your mouse’s DPI and report rate settings.
My left and right buttons are the wrong way round. Why?
The system’s primary button setting has been swapped, usually for left-handed use. On Windows 11 it’s under Settings, Bluetooth & devices, Mouse, Primary mouse button. The mouse itself is fine: the browser simply reports what the system tells it.
Does it work with a wireless or Bluetooth mouse?
Yes. A wireless mouse’s presses reach the browser the same way a wired one’s do. If a button drops out only now and then, try a fresh battery and move the receiver closer before you blame the switch, because a weak link can lose a click.
Why doesn’t the right-click menu open in the box?
The test switches it off inside the box so it can see the right button without a menu getting in the way. Everywhere else on the page, right-click works as usual.
Why did my browser ask whether I want to leave the page?
Back and Forward normally take you to another page. The test tries to stop that while the pointer is in the box, and asks the browser for a warning as a last guard in case the browser or mouse software acts first. Choose to stay and carry on.
My mouse has more than five buttons. Can I test the extras?
Not here. The test counts the five standard buttons that browsers know about. Extra buttons on gaming mice usually send keystrokes set in the maker’s software, so the keyboard test is the place to see whether they register.
Is this mouse button checker free, and does it record anything?
It’s free, with no sign-up. The test only notes which buttons have been pressed while the page is open. Nothing is stored or uploaded, as our privacy page explains.