Skip to the content

Mic test

Free mic test: speak, watch the level and hear 3 seconds played back. A plain answer says if your microphone works. Nothing is uploaded.

  • Nothing is stored or uploaded
  • Free, no sign-up, nothing to install
  • Chrome, Edge, Firefox and Safari

Check your microphone

Speak, watch the level and hear a 3-second playback. You get a plain answer at the end.

Your browser will ask first. The page needs it to hear you; the sound stays on this device.

What happens next

Your browser shows its own question near the address bar. Choose Allow.

This test runs in your browser. The 3 seconds you record stay in this page and are gone when you leave. Nothing is stored or uploaded.

This mic test listens through your browser and tells you in one sentence whether your microphone is picking you up. It’s a quick mic check before you join a call, record a voice note or start a game. Speak, watch the level, then record three seconds and hear exactly what the microphone sent. There’s nothing to install and no account.

How to test your mic

Testing a mic takes under a minute once the browser has said yes. Plug in or connect the microphone you’ll actually use first, whether that’s a headset, a USB mic or earbuds. That matters because the browser lists what you have connected when the page asks.

Allow the microphone when your browser asks

Press Allow the microphone. Your browser then shows its own question near the address bar, and you choose Allow. The page can’t skip that question and wouldn’t want to: it’s how the browser keeps sites from listening without your say-so. If you close the question by mistake, the test tells you so and you can press Try again.

Speak and watch the level

Talk as you would on a call. Count to ten, read a line from this page, anything with your normal voice. The bar moves when sound arrives, and within a few seconds you get an answer. If you have more than one microphone, the test lists them above the meter: choose the one you’re testing and the level starts again from that one.

The mic test’s level meter with about half of its segments filled in blue, the Record 3 seconds and Play it back buttons, and the answer Okay: your microphone is picking up sound.
While you talk the meter should fill to around the middle. Once the test has heard you, the answer turns to Okay.

Record 3 seconds and play it back

Press Record 3 seconds, say something, then press Play it back. Use headphones for the playback if you can, so you hear the recording rather than your speakers bouncing back into the mic. This step is the one that catches the problems a moving bar can’t show.

Is my mic working? What each answer means

Every test on this site ends in Okay, Check this or Not working, and the mic test says which one in plain words. Here is what each answer means and what to do next.

  • Okay: “Your microphone is picking up sound”. Sound loud enough to be a voice arrived for long enough to count, and it never reached the top of the scale. Play it back to hear how you’ll sound.
  • Check this: “Your microphone works, but the sound is too loud”, or “Your microphone is connected but silent”. Too loud means it will crackle on a call; silent means the browser has the microphone but hears nothing from it. You can usually fix both in a minute, and the sections below say how.
  • Not working: the browser couldn’t use the microphone at all. The answer says why: your browser or your system settings are blocking it, no microphone was found, it couldn’t be started because another app may be using it, or it was disconnected during the test. Blocks come with the steps to undo them for your browser and system.

How the mic test decides

The test shows the limits behind those answers under How this test decides. Sound louder than 50 dB below the top of the scale counts as hearing you, once it adds up to 0.3 seconds, so a single click on the desk doesn’t count. If nothing that loud arrives within 8 seconds, the test calls the microphone silent. If the sound reaches 99% of the top of the scale three or more separate times, it calls it too loud. These are starting values measured in your browser, not a lab figure.

Three microphone level meters: one filled to just past the middle, marked as a good level; one empty, marked silent; one filled to the end with the last two segments in amber, marked too loud.
A working mic sits around the middle while you talk. An empty meter is a mic that’s connected but silent, usually muted or turned down. A full one reaches the top of the scale.

“Too loud”: why it will crackle on a call

A microphone can only send sound up to a fixed top. Anything louder is cut off flat, and a flattened voice reaches the other end as crackle or a harsh buzz. People often hear it as a bad connection when it’s really the input level. Turn the input level down in your sound settings, or move the microphone a little further from your mouth, then speak again. Shouting into a headset boom during a game will trip this too, which is fair: that’s how it’ll sound to your team.

A sound wave that grows louder from left to right until its peaks are cut flat against the top and bottom of the scale, with the flat parts marked in amber.
Once your voice reaches the top of the scale, the peaks are cut flat. That’s the crackle people hear. Turning the input level down brings the peaks back inside.

“Connected but silent”

The browser has opened the microphone, so it isn’t blocked, but in 8 seconds nothing loud enough to be a voice came through. When the microphone sends complete silence rather than a little room noise, the test says so, because that nearly always means something is muted. If your system has paused the microphone, it says that instead. And if the device has other microphones, it tells you how many, so you can pick another from the list and try again. The answer changes as soon as the microphone hears you.

The mic test with an empty level meter and the answer Check this: your microphone is connected but silent, after listening for 8 seconds and hearing nothing.
An empty meter and this answer mean the browser opened the microphone but no sound came through. A mute switch or a level turned right down is the usual cause.

Hear yourself as others will hear you

A mic test with playback answers the question a meter can’t: what do I actually sound like? A bouncing bar proves sound is arriving. It doesn’t tell you the sound is muffled, that a laptop’s built-in mic is picking you up from across the room, or that the headset you thought you were using isn’t the one being heard. Three seconds of your own voice tells you all of that at once.

This test plays back what the microphone itself sent. It turns off the browser’s echo cancelling, noise suppression and automatic level. So the meter and the playback are the raw sound, and clipping is real clipping rather than something the browser has smoothed over. Call apps switch that processing on, so on Teams or Zoom you may sound a little cleaner and steadier than in the playback. If the playback sounds clear, the call will be at least as good.

The three seconds you record stay in this page. They’re never uploaded or saved anywhere, and they’re gone when you leave or reload.

Reading the level meter

The meter runs from 60 dB below the top of the scale, which is about how quiet an empty room reads, to the very top. While you talk at a normal volume, it should sit somewhere around the middle and jump about with your words. The test also describes the level for screen readers: Silent, Quiet, A good level or Too loud.

If your mic is so quiet that the bar barely lifts and the level reads Quiet, the usual reasons are distance and settings. A headset boom should sit a couple of fingers’ width from the corner of your mouth, not up by your ear. A desk mic works best a hand’s length or so away and pointing at you. Many USB mics pick up from one side only, so check which side is the front. Then look at the input level in your system’s sound settings, covered below. If the bar’s last segments light up when you talk normally, you’ve gone the other way: turn the level down until only your loudest words get near the end.

Choosing the right microphone

Most laptops have a microphone built in, so plugging in a headset gives you two. Computers and call apps don’t always switch to the new one. The most common surprise on a call is that people hear you through the laptop’s mic while the headset mic sits unused.

Testing a headset, AirPods or a laptop’s built-in mic

For a headset mic test, choose the headset in the list and listen to the playback. A headset mic close to your mouth sounds near and dry. A laptop mic sounds further away, with more of the room in it and more keyboard noise. If you can hear the difference, you know which one is live.

Bluetooth headsets and earbuds, AirPods included, work differently from wired ones. On a computer, using their microphone usually switches them into a headset mode built for calls, which sounds narrower, a bit like a phone line. That’s how Bluetooth calls work, not a fault in the mic. On a phone, the list may show a single microphone, because the phone decides which one the browser gets. Connect the earbuds before you open the page, then play your recording back. If it sounds distant and roomy, it’s the phone’s own mic you’re hearing, not the earbuds.

When the wrong microphone is chosen

If the test says silent and the list shows another microphone, try that one before anything else. Some computers also list inputs that aren’t really microphones, such as a monitor’s audio connection or a virtual device left behind by recording software. These show up as microphones but send silence. The one you want is usually named after the headset or the USB mic, or called something like Microphone Array for a laptop’s own.

Why your mic isn’t working

A microphone’s sound passes through several places before it reaches a web page or a call app. Any of them can stop it. Working through them in order is quicker than guessing.

Four boxes in a chain, microphone, system, browser and call app, each beside what can stop the sound there: a mute switch, input level or privacy, the site’s permission, the app’s microphone choice.
The mic test checks everything up to the browser. A call app makes its own choice of microphone after that, which is why a mic can pass here and still be silent in Teams or Zoom.

A mute switch or button on the mic or headset

This is the cause of most “connected but silent” answers. Look for a slider on the headset cable, a button on the ear cup, a boom that mutes when you flip it up, or a button on top of a USB mic that lights red when muted. Some laptops have a microphone mute key on the keyboard, often with a small light on it.

The input level turned down in Windows 11 or macOS

If the meter stays flat, or Windows’ own microphone test reports a volume of 0, check the input level. In Windows 11, open Start, then Settings, then System, then Sound. Under Input, select your microphone and check the Input volume slider isn’t at or near zero. On a Mac, open the Apple menu, then System Settings, then Sound, then Input, choose the microphone and drag the Input volume slider up. Apple notes that some inputs, such as digital ones, have no slider; you set their level on the device itself.

Another app is using the microphone

When the test says the microphone couldn’t be started, another app may be holding it, often a call app still open in the background or a recording program. Close them, press Try again, and if that doesn’t help, unplug the microphone and plug it back in, or restart the computer.

The browser or system is blocking it

If you once chose Block, or your system’s privacy settings keep the browser away from the microphone, the test shows the steps for your own browser and system. In Windows 11 the switches are in Settings, then Privacy & security, then Microphone: Microphone access, Let apps access your microphone and Let desktop apps access your microphone all need to be on. On a Mac, it’s System Settings, then Privacy & Security, then Microphone, where the switch for your browser must be on; quit the browser and open it again afterwards. For every browser, our guide shows how to allow the microphone in Chrome, Edge, Firefox or Safari.

It works here but not in Teams, Zoom or Discord

This is the most common problem of all, and it’s good news in disguise. If this test hears you, the microphone, its cable and your system are fine. Call apps don’t simply use whatever the system’s default microphone is. Each one keeps its own choice, its own volume and sometimes its own mute, and that’s where to look next.

Teams. In the desktop app, select the three dots next to your profile picture, then Settings, then Devices, and choose your microphone under Audio settings. During a meeting, select the arrow next to Mic, then More audio settings; in Teams for personal use it’s More, then Audio settings. If your mic works here but not in Microsoft Teams, our guide goes through the rest.

Zoom. In the desktop app, click your profile picture, then Settings, then Audio, where Test microphone records you and plays it back. In a meeting, click the arrow next to Mute to switch microphones. For a mic not working in Zoom, see the guide.

Discord. Open User Settings, then Voice & Video, and choose your microphone under Input Device. Check Input Mode isn’t set to Push to Talk if you meant to talk freely. When others can’t hear you on Discord, the guide covers input sensitivity and the rest.

How to check your mic without a website

Your system has its own checks, and they’re worth knowing when a browser isn’t to hand. In Windows 11, go to Start, then Settings, then System, then Sound, select your microphone under Input, and under Input settings choose Start test, speak, then Stop test. Microsoft’s page on setting up and testing microphones in Windows has the details. On a Mac, the Input tab in Sound settings has a live input level that moves as you speak, as Apple’s guide to sound input settings shows. On an iPhone, record a few words in Voice Memos and play them back.

What a browser mic test can and can’t tell you

A browser can tell whether sound is arriving from the microphone, how loud it is and whether it’s reaching the top of the scale. With the playback, you can judge the rest by ear. That covers most of what goes wrong before a call.

It can’t give your microphone a quality score, and it doesn’t try. It can’t measure how well noise cancelling works, separate your voice from a fan or a keyboard, or detect echo. Nor can it see the settings inside a call app. A level in dB here is relative to the top of the scale in this browser, not how loud you are in the room. Static that comes and goes, or a mic that cuts out every few minutes, may not happen during a short test at all. If you hear crackle in the playback while the level is well below the top, the cable, the plug or a wireless connection is the likelier cause.

Your privacy

This online mic test runs entirely in your browser. Nothing is stored or uploaded. Your own device works out the level as you speak. The page holds the three-second recording so you can play it back, and it’s gone when you leave the page. Our privacy page explains how the tests handle your data.

Got a call coming up? You can check your speaker, mic and camera together before a call, or test your webcam on its own.

Questions

Does this mic test record my voice?

Only when you press Record 3 seconds, and only into the page itself so you can play it back. Nothing is uploaded or saved to a server, and the recording disappears when you leave or reload the page. The level meter works on the sound as it arrives and keeps nothing.

Why does the browser ask for permission first?

Browsers never let a website use your microphone without asking you, and that’s a good thing. Choose Allow and the browser remembers it for this site. If you chose Block before, the test shows how to change it, or see how to allow microphone access in your browser.

Is Discord’s mic test more accurate than this one?

They check different things. Discord’s Let’s Check button tests the microphone Discord has chosen, with Discord’s own processing, so it’s the right test for Discord. This test checks the microphone through your browser and plays back the raw sound. If this one passes and Discord’s doesn’t, the microphone is fine and the problem is in Discord’s settings.

Why is my mic picking up background noise or my keyboard?

Microphones hear everything near them, and this test plays the sound back with noise suppression off, so you hear it all. The meter can’t tell your voice from a fan; both show as level. A headset mic close to your mouth helps most, and call apps’ own noise suppression will usually take out steady sounds like a fan.

Why is my mic echoing?

Echo on a call is almost always your speakers playing the other person’s voice back into your microphone. Wearing headphones fixes it. This test doesn’t detect echo, but you can check your speakers or headphones separately.

Can I test my mic on my phone?

Yes. The test runs in the browser on a phone as well as on a computer: open this page, allow the microphone and speak. Your phone may list only one microphone, since the phone itself chooses which one the browser gets.

Can this test rate my mic’s quality or its noise cancelling?

No. Any “quality score” from a web page would be a guess dressed up as a number. The test tells you whether the microphone hears you, whether the level is right and whether it clips, and the playback lets you judge the sound yourself.

Can I test my Xbox or PlayStation headset mic here?

Only by plugging the headset into a computer or phone and testing it there. A web page can’t reach a console’s microphone. If the headset works here, a problem on the console is in the console’s or the game’s settings.