No keys have registered yet
Press every key once. Each one turns green when the browser hears it.
Press “Start the test”, then press every key once. While it listens, Tab, Space and the arrows stay in the test instead of moving the page.
Typing never leaves the page. Keys are read as they arrive and are not stored: the test keeps only which keys have registered, never what you typed.
This test runs in your browser. Nothing is stored or uploaded.
This keyboard test shows you which keys work, which never register and which type twice from one press. Start it, press every key once, and each key turns green on the drawing as your browser hears it. When you’re done you get one plain answer and, if you want it, a dated PDF to keep. It works as a keyboard tester for desktop boards, laptops and Macs, and nothing needs installing.
How to run the keyboard test
It’s a key test for every key on the board. This keyboard keys checker reads each key by where it sits, not the letter it types. So it works whatever language your keyboard is set to.
- Pick your layout above the drawing: ANSI, ISO or Compact, and tick Number pad if yours has one.
- Press Start the test. While it listens, Tab, Space and the arrow keys stay in the test instead of moving the page.
- Press every key once, row by row. Each key goes green when it registers, and the counter shows how many of the total have arrived. Don’t forget the keys you rarely use: right Ctrl, right Alt, the number pad.
- If every key registers, the answer appears by itself. If one won’t light up however you press it, press That’s every key and the test tells you which ones it’s still waiting for.
To stop listening, hold Esc for a second, press Stop listening, or click anywhere else on the page. Carry on testing picks up where you left off, and Start again clears everything. Every key, as text, below the drawing, gives the same results in words.
What the keyboard test answer means
A key counts once the browser reports it pressed. Holding a key down so it repeats still counts as one press, so you can’t trip the test by leaning on a key. On a standard ANSI keyboard with no number pad the test counts 81 keys on Windows; ISO adds one, and the number pad adds 17. The keyboard input test then ends in one of three answers:
- Okay: “All 81 keys registered”, or whatever your layout’s total is. Every key on the layout you picked reached the browser, and none typed twice.
- Check this: every key registered, but one or more typed twice from a single press. The test names each key and the gap it measured, for example “Two E presses arrived 6 ms apart”. That’s called chatter, and it usually means a worn or dirty switch.
- Not working: after you press “That’s every key”, the test lists the keys that never reached the browser. Press each one again while you watch the drawing. A key that stays dark in another port and another browser usually has a broken switch or connection.

Keys the test doesn’t count
Some keys are marked not counted: Fn, Print Screen, Scroll Lock, Pause, Insert and the Menu key, plus a few more on a Mac, a Chromebook or Linux. A page often can’t see them, or your keyboard may not have them. They still turn green if they arrive, but the answer never depends on them. Each comes with its reason, so an unlit Fn key is never taken for a fault.
Keys that aren’t on the drawing, such as media keys, show up under Other keys that registered and don’t change the answer either.
ANSI, ISO and compact keyboards: which layout is yours?
The test draws three layouts, and picking the right one matters. Test an ISO keyboard as ANSI and the extra key beside left Shift has nowhere to land. It turns up under Other keys instead of on the drawing.
How to tell ANSI from ISO
Look at the Enter key first. On an ANSI keyboard, the usual layout in the US, Enter is a wide bar on one row, and the backslash key sits above it. On an ISO keyboard, common in the UK and most of Europe, Enter is tall and runs over two rows, shaped like an upside-down L. Then look at the left Shift: ANSI has a long one, ISO a short one with an extra key between it and Z. On a UK keyboard that extra key types a backslash, and the key tucked in beside Enter types #.

Japanese keyboards (JIS) have a few more keys again. The test has no JIS drawing, so pick the closest layout. The extra keys show under Other keys that registered when they arrive.
Compact and 60% keyboards
A tenkeyless keyboard is a full-size one without the number pad: pick ANSI or ISO and leave Number pad unticked. A 60% keyboard goes further and keeps only the main block. There’s no function row, no arrow cluster and no Home, End or Page keys, and Esc usually sits where the ` key would be. Pick Compact for one of these. The keys it reaches through Fn, such as the arrows, still register; they appear under Other keys that registered and don’t change the answer, because a 60% board doesn’t have them as keys of their own.

Testing a laptop or Mac keyboard
A laptop keyboard test works the same way, with one catch: laptops hide several keys behind Fn.
On a laptop
On most laptops, F1 to F12 change brightness and volume until you hold Fn. So hold Fn and press each F key to send the real key. Some laptops have an Fn Lock that swaps this round, often on the Esc key; check the symbols printed on yours. Home, End, Page Up and Page Down are usually Fn with the arrow keys. If your laptop has no Insert, Scroll Lock or Pause key at all, that’s normal, and the test doesn’t count them.
On a Mac
On a Mac, the drawing switches to Apple’s keys: Command, Option and Control along the bottom, Return instead of Enter, and Delete where a PC has Backspace. Hold fn (the Globe key on newer Macs) to send F1 to F12 instead of brightness and sound. Hold it with the arrows for Home, End, Page Up and Page Down. If you’d rather the F keys behaved as F keys all the time, Apple explains the setting in how to use the function keys on your Mac.
Two keys behave differently on a Mac. F11 shows the desktop, so macOS takes it before the page does, and the test doesn’t count it. And Mac keyboards have no Print Screen, Scroll Lock, Pause, Insert or Menu key. So the test leaves those out of the count on any Mac, even with a PC keyboard plugged in.
On a Chromebook
The top row of a Chromebook is Back, Refresh, Full screen and so on, not F1 to F12. So the test leaves the F keys out of the count on ChromeOS. If you’ve set ChromeOS to treat the top-row keys as function keys, they’ll still go green when pressed.
Keys that type twice: a keyboard chatter test
If your keyboard keeps typing double letters, “tthe” or “helllo”, the switch under that key is probably chattering. A key switch is two bits of metal that touch when you press. As the contacts wear, collect dust or tarnish, they can flicker apart and back together as the key comes up. The keyboard then sends that flicker as a second press. Keyboards filter out a short burst of this, called debounce (the open-source QMK firmware on many custom boards waits 5 ms by default), and chatter is what gets through when the flicker outlasts the filter.
How the keyboard test times each key
The test times every key from the moment it goes up to the moment it comes down again. If that gap is less than 30 ms, it counts the key as typed twice from one press, because nobody’s finger is that quick. The answer names the key and the gap. The 30 ms is a starting value that we’re still tuning. Your browser times the gaps, so treat them as a comparison made in the browser, not a lab measurement.

Chatter comes and goes, so press a suspect key twenty or thirty times at your normal speed rather than once. Mechanical keyboard chatter is the classic case, but membrane and laptop keys do it too. A key held down so it repeats by itself is not chatter, and the test counts it once. Mice suffer from the same fault in their buttons; if yours clicks twice, try the mouse double click test.
Some browsers blur their clock for privacy. When it’s too coarse to time gaps this short, the test says so. It still checks every key, but try another browser for chatter.
Pressing several keys at once: rollover and ghosting
Under the drawing, the test shows the most keys held down at once, as your system reports it. People use it as a rough key rollover test, so here’s what that number does and doesn’t tell you.
Rollover is how many keys a keyboard can report held together. Many keyboards, wired and wireless, send their keys in the standard USB format, which has room for six ordinary keys at a time plus the modifiers (Shift, Ctrl, Alt and the Windows or Command key) on top. Press a seventh and, under the USB HID specification, a keyboard in that mode sends an error code in place of the keys rather than the seventh key. Keyboards sold as n-key rollover use a different format that can carry every key at once.
Ghosting: when the keyboard sees a key nobody pressed
Ghosting is a different problem with the same symptom. Inside most keyboards the switches sit on a grid of wires, and the keyboard finds a press by checking which row and column are joined. Press three keys on three corners of a square and they join the fourth corner’s wires. The keyboard then sees a key nobody pressed. Boards with a diode at each switch don’t have this problem. Cheaper ones block the extra key instead, which is why some combinations cancel out and a game can drop a key when you run, strafe and jump at once.

For a quick keyboard ghosting test, hold the combinations you actually use, such as W, A and Shift with Space, and see whether every key lights up together. Read the number honestly, though: it’s what reached the browser through your system and connection, not a rating of the keyboard alone. So this isn’t an n key rollover test in the lab sense, and a low number doesn’t prove the box wrong about NKRO; the keyboard may be in a different mode.
What a browser can and can’t see
A key press goes from the switch to the keyboard’s own chip, then to your computer, and only then to the browser. Anything taken out on the way never reaches the page, however hard you press.

- On most keyboards Fn never leaves the keyboard: it changes what the other keys send, and sends nothing itself. That’s why no browser keyboard tester can light it up. You can still check it works by holding it and pressing a key it changes, such as F1 on a laptop.
- By default, Windows 11 uses Print Screen to open the Snipping Tool, and only the release reaches the page. Most Linux desktops keep the Super (Windows) key for their own menu, so the test doesn’t count it there. Ctrl+Alt+Delete, Alt+Tab and Windows+L belong to the system, and shortcuts such as Ctrl+W still close the tab while the test listens.
- A screen reader takes the keys it uses for itself, often Insert or Caps Lock, before the page sees them. Use its pass-through key to send them on.
- The test doesn’t measure latency, polling rate or response time. A page can’t see how often the keyboard reports, so any such figure from a browser is a rough comparison at best.
The test reads each key’s position code, which the browser gives the page for exactly this purpose. MDN describes it as the physical key, unchanged by your layout or by Shift. So a key labelled A on a French keyboard is the same key as Q on a US one.
Common causes when a key fails or types twice
Before you blame the keyboard, rule out everything between it and the page. Work down this list and run the test again after each step.
- Start with the connection. Plug the keyboard straight into the computer rather than a hub or monitor port, and try another USB port and cable. For a wireless keyboard, charge it or change the batteries, since a low battery can cause missed or repeated keys. Logitech’s troubleshooting page goes through the same order.
- If a key stays dark, try another browser, then another computer if you have one. A key that works elsewhere points to a setting or a program, not the hardware.
- On Windows, Filter keys ignores brief or repeated presses. Holding right Shift for eight seconds can switch it on by accident, as Microsoft’s list of accessibility shortcuts shows. Look under Settings, Accessibility, Keyboard.
- Crumbs and dust under a key can stop it registering or make it chatter. Unplug the keyboard, tip it over and use compressed air around the key. On a mechanical board, pull the keycap with a keycap puller and clean around the switch.
- If cleaning doesn’t stop a key typing twice, the switch is likely worn. On a hot-swap board you can pull it out and fit a new one in a minute. On a soldered board it needs desoldering, and on a laptop the key usually means a repair. Some makers have also fixed double typing on particular models with a firmware update, so check for one first.
Our guide to a keyboard key not working or typing twice goes through each fix step by step, and the fix guides cover other devices too.
The keyboard test report
Once the test has its answer, Download the report (PDF) makes a one-page, dated report in A4 or US Letter. It shows the answer, how many keys registered out of the total, the most keys held at once, and lists of keys that never registered, typed twice (with the gap), registered, weren’t counted, or arrived from outside the drawing. It also says how the test works and what a browser can’t see. It’s made in your browser and saved straight to your device.
Use it to back up a warranty claim for a keyboard that chatters, to give a repair shop a list of dead keys, or to show a buyer that every key on the laptop you’re selling registered. Be clear about what it can’t do. A browser cannot read a keyboard’s serial number, so the report shows what registered in one browser session. It is not proof about a specific device.
Is it safe to type into a keyboard tester?
Yes. Typing never leaves the page. The test reads each key by its position as it arrives and keeps only which keys have registered and whether any typed twice. It never keeps what you typed or the order of the keys, so even a password typed by habit leaves no record. Nothing is stored or uploaded, and the PDF is made on your own device. The privacy page says the same for the whole site.
Keyboard test questions
How do I check if my keyboard keys are working?
Press “Start the test” at the top of this page and press every key once. Each one turns green when the browser hears it. The test lists any key still grey after you press “That’s every key” as never registered.
Why can’t the test see my Fn key?
On most keyboards Fn is handled inside the keyboard. It changes what other keys send and sends nothing of its own, so no browser keyboard tester can see it. To check it, hold Fn and press a key it changes.
My keys type the wrong characters. Is the keyboard broken?
Almost never. The system is usually set to a different layout from the one printed on the keys. A UK keyboard set to US, for example, swaps the @ and ” symbols. If each key lights up in the right place on the drawing, the hardware is fine and the fix is in your language settings.
Can I test a wireless or Bluetooth keyboard?
Yes, connect it as usual and run the test. If keys drop out or type twice, charge it or change the batteries and move it closer to the receiver or computer, then test again.
How do I fix a stuck or unresponsive key?
Unplug the keyboard and clean around the key with compressed air, or lift the keycap on a mechanical keyboard and clean underneath. If it still fails, our guide to a keyboard key not working or typing twice covers the next steps.
I spilled a drink on my keyboard. What now?
Unplug it or shut the laptop down straight away, and turn it upside down so the liquid drains out of the keys. Let it dry fully, for at least a day, before you switch it on. Sugary drinks leave a sticky film that often means taking the keycaps off, or a repair for a laptop.
Can I use the report for a return or to sell a laptop?
Yes, as a dated record of which keys registered, typed twice or never registered. A browser can’t read a serial number, though, so it shows one browser session and isn’t proof about a specific device.
Does it measure keyboard latency or polling rate?
No. A page can’t see how often a keyboard reports or how long a press takes to arrive, so this isn’t a keyboard latency test. The only times it shows are the gaps behind a key typing twice.
Is there a keyboard test built into Windows, macOS or ChromeOS?
ChromeOS has one for a Chromebook’s own keyboard: open Settings, search for diagnostics, then choose Input and the internal keyboard, as Google’s help page describes. Windows and macOS have no key-by-key check in their settings, though some laptop makers include one in their own diagnostics software.
The test says a key typed twice, but I pressed it twice. Is that wrong?
Only if you pressed it twice within 30 ms, which is quicker than a finger can lift and press again. Fast typing leaves far longer gaps. If in doubt, press Start again and try that key slowly.
Can I test a keyboard on a phone or tablet?
A phone, or a tablet on its own, has no keys for the test to hear. Attach a keyboard to a tablet, or open this page on a computer. The mouse test works the same way for mouse buttons.