Skip to the content

Scroll wheel test

Free online mouse scroll test: turn the wheel a notch at a time and catch notches that skip or jump the wrong way. Nothing is stored.

  • Nothing is stored or uploaded
  • Free, no sign-up, nothing to install
  • Chrome, Edge, Firefox and Safari

This test needs a mouse and a computer

It reads the buttons and wheel of a mouse, which a phone or a tablet's touch screen doesn't have. Open this page on a computer with a mouse connected.

These tests work on this device:

Below is a preview of the test as it looks on a computer.

Turn the wheel one notch at a time

Down 20 notches, then up 20. Each notch adds a mark; one that goes the wrong way shows in red.

Down
0
Up
0
Wrong way
0
Uneven
0

The page won't scroll while the pointer is over this box.

Turn the wheel down, one notch at a time.

The answer appears here after 20 notches each way, or when you press “Show the result now”.

Touchpads and free-spinning wheels send smooth scrolling, not notches. The test says so and skips the count.

How this test decides

Each notch is one step of the wheel as the browser reports it. A notch goes the wrong way when one or two go against the way you are turning and the next comes back; 3 or more in a row means you turned round. A notch is uneven when it moves the page more than 25% of a notch away from the usual step. The answer comes after 20 notches each way.

Smooth scrolling is recognised by long, quick runs of steps of different sizes, or by steps that move sideways and up or down at once, which a wheel never does. Down and up are as your system reports them: with natural scrolling on a Mac they are the other way round. Step sizes are as your browser reports them, so they are a comparison made in the browser. These are starting values that we are still tuning.

This test runs in your browser. Nothing is stored or uploaded.

How to run the mouse scroll test

This mouse scroll test reads your wheel one notch at a time and catches the two faults people actually notice. A notch that goes the wrong way makes the page jump back while you scroll. A notch that moves the page more or less than the others makes the wheel seem to skip. Wondering how to check if your mouse scroll is working properly? This scroll test gives you a plain answer in about a minute.

  1. Put the pointer over the box. The page won’t scroll while it’s there, so you can turn the wheel freely.
  2. Turn the wheel down 20 notches, one at a time. Feel each click of the wheel and pause slightly between them. Each notch adds a mark.
  3. Then turn it up 20 notches, the same way. The test tells you when to switch.
  4. Watch the counts beside the marks: Down, Up, Wrong way and Uneven. A notch that goes the wrong way shows in red as it happens.
  5. After 20 each way the answer appears. If you want it sooner, press Show the result now.

Slow and steady matters here. The test works out notches from the wheel’s events, because a browser never says “one notch”. Spin the wheel fast and several notches arrive bunched together. The test still counts them, but a fast turn can fool it into seeing a step of an odd size. One notch at a time keeps the reading clean.

If your wheel goes wrong only in one stretch of its turn, or only after a while, keep going past 20. Press Start again for a second run, or a third. A bad patch that turns up in two runs is a real one.

What the answer means

Each notch is one step of the wheel as the browser reports it. The test checks each one for two things: which way it went, and how far.

  • Okay: “The wheel turns steadily both ways”. Twenty notches down and twenty up, all the same size and none the wrong way. On a touchpad or a free-spinning wheel you’ll see “Scrolling reached the browser both ways” instead, because those don’t have notches to count.
  • Check this: “2 notches went the wrong way”, or “3 notches were uneven”. The wheel works, but it’s misreading some of its turn. Wrong-way notches usually point to dust in the wheel or a worn wheel sensor. Uneven ones feel like the wheel skipping.
  • Not working: “No scrolling reached the browser”, or “The wheel only scrolled down” (or up). Nothing came through one way, or at all. If the wheel doesn’t scroll anywhere else either, the wheel or its sensor has failed.
A scroll wheel test result: a column of notch marks, counters showing 20 down, 20 up, 1 wrong way and 0 uneven, and the answer Check this: 1 notch went the wrong way.
The counters show what the wheel sent: twenty notches each way, and one that went against the way you were turning it.

A notch counts as going the wrong way when one or two go against the way you’re turning and the next comes back. Three or more in a row against the turn means you turned round on purpose, so the test doesn’t hold that against the wheel. A notch is uneven when it moves the page more than a quarter of a notch away from the usual step. Both limits are starting values, and we are still tuning them.

Two columns of notch marks. In the first, every mark points down. In the second, one mark in the middle points up and is drawn in red.
Left: a steady run, every notch going down. Right: one notch reported as up while you turn down. That single notch is the jump you feel on a page.

Why a mouse scroll wheel jumps the wrong way

You’re reading down a long page, turning the wheel steadily, and the page lurches back up a line or two before carrying on. That’s the most common reason people search for “mouse scroll wheel jumps”, and it nearly always comes from one small part beside the wheel.

The wheel’s sensor, and how dust gets in

The wheel turns on an axle, and one end of that axle sits in a small sensor, called an encoder, that counts how far it turns and in which direction. In most mice it’s mechanical: little metal contacts brush over a ring as the wheel turns, making two signals that switch on and off slightly out of step. Which signal changes first tells the mouse which way you turned. Some mice use a light and a slotted disc to do the same job.

A mouse’s scroll wheel seen from the front, standing on its axle, with a small box-shaped sensor on one end of the axle and a switch underneath the wheel.
1 the wheel, 2 the encoder on its axle, which counts each notch, 3 the switch for the wheel click. Dust or wear in the encoder makes notches go the wrong way.

The trouble is that the encoder is open to the gap around the wheel, so it collects dust, fluff and skin. When grit gets between the contacts, or they wear, one of the signals flickers. The mouse reads the flicker as a short step backwards, and your page jumps. That’s why the problem is often worst at slow speeds, and why it tends to arrive gradually.

When the wheel skips instead

Sometimes the wheel doesn’t go backwards, it just moves the page unevenly: one notch does nothing, the next moves twice as far. The test counts those as uneven notches. The cause is often the same worn or dirty encoder, missing a count or adding one. A wheel that’s been knocked or has a loose axle can do it too, since the notches you feel no longer line up with what the sensor counts.

Two rows of bars. In the first row every bar is the same length. In the second, one bar is short and one is long.
Each bar is how far one notch moved the page. Top: every notch the same. Bottom: one short and one long notch, which feels like the wheel skipping.

When the mouse wheel scrolls the wrong way every time

A wheel that goes up when you scroll down, every single time, isn’t faulty. That’s a setting. On a Mac, Natural scrolling in System Settings, under Mouse, reverses the direction, as Apple’s guide to mouse settings describes. On Windows 11, Settings, Bluetooth & devices, Mouse has a Scrolling direction option. The test takes down and up as your system reports them. So with either setting reversed, its Down and Up counts swap round, and that’s fine: it still checks both ways.

Notched wheels, smooth wheels and touchpads

Most mouse wheels have notches: you feel a small click with each step, and each one sends one step to the computer. That’s what this test is built to read. Some wheels don’t work that way.

A free-spinning wheel, like the ones on Logitech’s MX Master range, can switch between a notched mode and a mode where it spins freely, and by default it shifts by itself when you scroll fast. A touchpad has no notches at all. Both send smooth scrolling: long, quick runs of steps of every size, and on a touchpad often a little sideways movement as well, which a wheel never makes. The test recognises that, says so, and skips the notch count. Scroll down and up over the box to finish, and you’ll get an answer about whether scrolling reaches the browser both ways.

If your mouse can switch modes and you want the notch count, put the wheel in its notched (ratchet) mode first. On Logitech’s MX Master mice that’s the mode shift button on top of the mouse, unless you’ve given it another job, and Logitech’s setup guide explains how to turn off the automatic switching in Logi Options+.

Is it the mouse or a setting?

Settings change how far each notch moves a page, not whether a notch goes backwards. On Windows 11, the Lines to scroll at a time slider sets the distance for every notch equally. So a slow wheel or a fast one is a matter of taste, not a fault. Microsoft’s page on mouse settings lists the options. Mouse software can add its own smoothing or acceleration on top, and if it does, try the mouse scroll test with that turned off.

Browsers and apps also differ. One notch can move a page a different distance in Chrome than in Firefox, or in a document than in a spreadsheet, because each one decides how to turn a notch into movement. That’s normal, and it’s why the test compares each notch only with the other notches in the same run, never with a fixed figure. If the wheel jumps in one app only, try the mouse scroll test here: an Okay points to the app.

The quickest way to settle it is the same as for any mouse fault: try the mouse on another computer, and another mouse on yours. A wheel that jumps everywhere it goes is the wheel.

What to do about a wheel that jumps or skips

Clean it first. It takes two minutes and fixes more jumpy wheels than anything else. Unplug the mouse or switch it off, then give short bursts of compressed air into the gaps on either side of the wheel while you turn it slowly with a finger. Tip the mouse and do it again from the other side. Turn the wheel quickly back and forth a few dozen times afterwards to work loose whatever’s left, then run the mouse scroll test again.

If wrong-way notches keep turning up, the encoder is probably worn, and cleaning won’t bring back worn contacts. A mouse under warranty can go back to the seller or the maker. Take a note of the test’s answer, as it describes the fault in plain words. On an out-of-warranty mouse, you can replace the encoder. Like a click switch, it’s soldered to the board, so it’s a job for someone comfortable with a soldering iron. For other mouse problems, the mouse fix guides start from the symptom.

What this scroll wheel test can’t tell you

Step sizes are as your browser reports them, so they’re a comparison made in the browser, not a measurement of the wheel itself. The browser never reports a notch as such: the test works notches out from the wheel’s events, and very fast turning can blur them. The test doesn’t count tilting the wheel sideways or horizontal scrolling. And it’s not a speed test: it checks that the wheel is steady, not how fast you can spin it.

The wheel click is a button, not a scroll, so another test covers it: check the wheel click and side buttons in the mouse button test. And if your clicks land twice, the double click test catches that.

Questions people ask about the mouse scroll test

How do I fix a scroll wheel that skips or goes up and down?

Start with compressed air into the gaps beside the wheel, turning it as you go, then test again. If notches still go the wrong way, the wheel’s sensor is probably worn. A mouse under warranty can go back to the seller or maker; otherwise you can replace the sensor, but it needs soldering.

Why is my scroll wheel inverted?

A system setting is reversing it. On a Mac it’s Natural scrolling in System Settings, under Mouse. On Windows 11, look for Scrolling direction under Settings, Bluetooth & devices, Mouse.

Does this scroll test work with a touchpad?

Yes, but differently. A touchpad sends smooth scrolling rather than notches, and the test recognises it and skips the notch count. Scroll down and up over the box and it tells you whether scrolling reached the browser both ways.

Why does one notch scroll a different amount in different browsers or apps?

Each browser and app decides how far to move for one notch, and your system’s lines-to-scroll setting scales it as well. So a notch is never a fixed distance. The test compares notches only with each other in the same run, which is what shows up a bad one.

Is this a scroll wheel jumping test or a skipping test?

Both. The test counts notches that go against your turn as wrong way, which is the jumping you see. It counts notches that move the page more or less than the others as uneven, which is the skipping you feel.

Can it measure my scroll speed?

No, and it isn’t trying to. It checks that every notch goes the right way and moves the page the same distance as the others. Spinning fast actually makes the reading less reliable.

Why is my scroll wheel zooming instead of scrolling?

Ctrl is being held. In browsers and many apps, Ctrl and the wheel together zoom. If you’re not touching it, the key may be stuck: check whether Ctrl is stuck with the keyboard test.

Does the test send anything to a server?

No. The page reads the wheel’s steps while it’s open, to draw the marks and give the answer. Nothing is stored or uploaded, as our privacy page explains.