Skip to the content

Double-click test

Double click test: click 50 times and see if your mouse fires twice by itself, under 80 ms apart. Free, in your browser, nothing stored.

  • Nothing is stored or uploaded
  • Free, no sign-up, nothing to install
  • Chrome, Edge, Firefox and Safari

This test needs a mouse and a computer

It reads the buttons and wheel of a mouse, which a phone or a tablet's touch screen doesn't have. Open this page on a computer with a mouse connected.

These tests work on this device:

Below is a preview of the test as it looks on a computer.

Last 20 clicks

No unwanted double clicks so far.

Click the round button 50 times with the left mouse button, at your usual speed. The answer appears after 50 clicks.

The answer appears here after 50 clicks.

How this test decides

The test counts every press the browser reports on the round button, and flags any two presses less than 80 ms apart: faster than a finger can click, so one press counted twice. The answer comes after 50 clicks.

Times are as your browser reports them for each press, so they are a comparison made in the browser, not a lab measurement. These are starting values that we are still tuning.

This test runs in your browser. Nothing is stored or uploaded.

How to run the double click test

This double click test counts 50 presses of one mouse button and flags any two that arrive closer together than a finger can click. That’s the mark of a mouse double-clicking by itself: you press once, the computer hears twice. It’s a mouse double clicking test you can run in your browser in about a minute, for the left button and then the right.

  1. Click the round button with the left mouse button, at your usual speed. Single clicks, one after another. There’s no prize for going fast, and rushing only blurs the result.
  2. Watch the timeline under it. It shows your last 20 clicks as marks, and if two come too close together it draws them almost touching, inside a red outline. The line underneath keeps a running count of unwanted double clicks.
  3. After 50 clicks the answer appears, with the gap for every pair it caught.
  4. Press Test the right button and do the same with the right button. The test switches off its right-click menu on the round button, so nothing gets in the way.

Only mouse presses count, so Enter and the space bar don’t add a click, and the test ignores touches on a screen. Why 50? A worn switch rarely misfires on every press. It slips now and then, so the run has to be long enough to give it the chance. If your mouse only plays up once it’s warm, use it for a while first and then test.

Is my mouse double clicking? What the answer means

The test times each press from the one before it, using the time your browser gives each press. It counts any two less than 80 ms apart as one press that came through twice. You can see the caught pair on the timeline as it happens, which is usually more convincing than any number.

  • Okay: “No unwanted double clicks in 50 clicks”. No two presses came less than 80 ms apart, so in this run every click arrived once.
  • Check this: this test doesn’t give it. Fifty clicks either catch a pair or they don’t. If you get Okay but still see the odd double click in your work, treat that as your Check this: run the test again, and again later in the day, because a fault that comes and goes can slip through one run.
  • Not working: for example “2 unwanted double clicks in 50 clicks”, with the gaps listed, such as 12 ms and 9 ms. One press is being counted twice. That points to a worn or dirty switch under the button you were testing.
A double click test result: a counter at 50 clicks, a timeline of the last 20 with one pair marked in red, and the answer Not working: 2 unwanted double clicks in 50 clicks, 38 ms and 44 ms apart.
A caught pair is marked in red on the timeline, and the answer lists the gap between its two presses. Anything under 80 ms is faster than a finger can click.

This is the common complaint of a mouse double clicking on a single click. Folders open when you only meant to select them, a drag lets go halfway across the screen, a text selection jumps to a whole word. Each of those is the computer doing exactly what it’s told: it got two clicks.

Why the test flags presses under 80 ms apart

Clicking means pressing, lifting and pressing again, and your finger and the button both have to travel. At your usual pace that takes well over 80 ms, so the test treats a pair closer than that as faster than a finger can click. A bouncing switch sends its second signal far sooner, often only a few milliseconds after the first. The 80 ms line sits in the gap between the two.

Two timelines of a switch’s signal. At the top, a press closes the contact once. At the bottom, the contact closes, opens and closes again a few milliseconds later, well inside the 80 ms mark.
Top: one clean press. Bottom: a worn switch bounces, so one press sends two signals a few milliseconds apart. The test flags any pair closer than 80 ms.

That figure is a starting value, and we are still tuning it. Times are as your browser reports them, so they are a comparison made in the browser, not a lab measurement. If you click deliberately fast, faster than you ever would at work, you are testing your finger rather than the mouse: slow down to your normal pace.

What makes a mouse double click by itself

Almost always it’s the switch, and almost never the computer. It turns up on every brand, Logitech and Razer included, and on cheap mice and expensive ones alike: any mouse whose buttons use mechanical switches can develop it. There is one setting on Windows that can fake the symptom, though, so it’s worth ruling out.

Switch chatter: a worn or dirty switch

Inside the switch, a thin, springy metal leaf snaps against a contact when you press. When the switch is new, it closes cleanly. With wear, the contact surfaces tarnish or pick up dirt, and the leaf can touch, bounce off and touch again within a few milliseconds. That’s switch chatter, sometimes called mouse chatter. Every switch bounces a little; the mouse’s own electronics ignore very short bounces, and when wear makes them longer than that allowance, they leak through as a second click.

A small mouse switch cut away to show the plunger on top, the springy metal leaf inside and the contact the leaf touches.
1 the plunger the button presses, 2 the springy metal leaf, 3 the contact. The leaf wears with use, which is what makes a click bounce.

That is why chatter tends to arrive slowly and get worse. It’s also why it often affects the left button first: it does most of the clicking. Some gaming mice use optical switches for the main buttons, which read the press with a beam of light rather than metal contacts. Razer, for one, sells its optical switches on the grounds that they don’t need a debounce delay. If yours has them and still clicks twice, the test catches it in exactly the same way.

When the setting is the problem, not the mouse

Windows has a File Explorer option that makes a single click open things. If your mouse has done it since the day you got it, check this first. In File Explorer, open the See more menu (the three dots), choose Options, and on the General tab make sure Double-click to open an item (single-click to select) is selected. Logitech’s own support page for a mouse that double-clicks when clicked once starts with the same setting. The setting doesn’t affect the test above, so a clean Okay here plus files opening on one click means the setting, not the mouse.

Then there’s the double-click speed. On Windows 11 it’s in Settings, Bluetooth & devices, Mouse, Additional mouse settings, on the Buttons tab. On a Mac it’s in System Settings, Accessibility, Pointer Control. This setting decides how far apart two clicks can be and still count as a double click; Microsoft’s documentation gives the Windows default as 500 ms.

Here’s what that setting can and can’t do. If your deliberate double clicks don’t open anything, or two slow single clicks open a file, adjusting it will help. It won’t cure chatter. A bouncing switch sends its two clicks only milliseconds apart, so every position of the slider counts them as a double click. Changing it only hides the problem from Windows’ own idea of a double click; a drag still lets go, and a game still sees two presses.

Testing the right button too

Right buttons chatter as well, just less often, and the symptom is harder to place: a context menu that opens and shuts at once, or flickers. Press Test the right button and run 50 more. The answer tells you which button the clicks came from, so you can’t mix the two runs up. People who search for a double click test right click usually have exactly that flickering menu.

What to do if your mouse double clicks

Start with dust. Hold the mouse upside down and give a few short bursts of compressed air into the gap around the button, clicking it as you go. Then run the double click test again. Grime on the contacts is sometimes all it is, and it costs nothing to try.

If pairs still turn up, the switch is worn. A mouse under warranty can go back to the seller or the maker: Logitech’s page above, for example, sends you to its customer care and warranty claim once the settings check doesn’t help. Keep a note of the test’s answer and the gaps it listed; it’s a quick way to show what’s happening. Some gaming mice let you lengthen the debounce time in their software, which can hide mild chatter for a while at the cost of a slightly later click. Past that, you can replace the switch, which means desoldering it from the board.

Our guide, mouse double-clicking by itself: causes and fixes, goes through each of those steps in more detail.

What the double click test can and can’t tell you

It can tell you that, in this run, a button sent two presses closer together than 80 ms, and how close. That is strong evidence of a chattering switch. It can’t measure how worn the switch is, and it can’t promise a mouse that passed today will pass next month.

The times are as your browser reports them. They’re good for comparing one press with the next, which is all this test needs, but they are not lab timings. The test only times the left and right buttons: it doesn’t cover the side buttons or the wheel click. For those, the mouse button test shows whether they respond at all. It’s not a click-speed test either, and it doesn’t count clicks per second.

If a key on your keyboard is doing the same thing, that’s chatter too, and the keyboard test catches a key that types twice. For other mouse faults, test every mouse button or try the scroll wheel test if the page jumps while you scroll.

Questions people ask about the double click test

Can a mouse that double clicks be fixed?

Sometimes. Compressed air around the button clears dirt on the contacts, and that can be enough. You can replace a worn switch, but it needs a soldering iron. On a mouse under warranty, the simplest fix is a replacement from the seller or the maker.

Is a double clicking mouse covered by warranty?

A switch that sends two clicks for one press is a hardware fault, and that’s what a warranty is for, though each maker and seller sets its own terms. Check yours, and contact them with the test’s answer and the gaps it listed to hand.

Does this test prove my mouse is faulty?

No test in a browser can prove that. It shows the presses your browser received during one run, and a pair a few milliseconds apart is very hard to explain any other way. It doesn’t identify the mouse, so it’s evidence, not a certificate.

Why does it say Okay when my mouse double clicks sometimes?

A worn switch often misfires only now and then, and 50 clicks may not catch it. Run the test a few times, and try it again just after the fault has happened in your work. The more runs you do, the better the chance of seeing it.

Can I test the right mouse button?

Yes. Press “Test the right button”, then click the round button 50 times with the right button. The right-click menu stays shut on the round button, and the answer says which button the clicks came from.

Can I test the side buttons for double clicks?

Not with this test. It times the left and right buttons only. The mouse button test will show whether Back and Forward respond, but it doesn’t time them.

Why does my mouse double click only in some apps?

It probably double-clicks everywhere and only shows where a double click means something, such as opening files, or where a release ends an action, such as a drag. Run the double click test: if it catches pairs, the mouse is the cause wherever you notice it.

Is anything recorded while I click?

Only the times of your clicks, which the page holds while it’s open so it can draw the timeline. Nothing is stored or uploaded, as our privacy page explains.