Skip to the content

Dead pixel test

Free dead pixel test: fill your screen with black, white, red, green and blue to find dead or stuck pixels on a monitor, laptop or phone.

  • Nothing is stored or uploaded
  • Free, no sign-up, nothing to install
  • Chrome, Edge, Firefox and Safari

Fill the screen with one colour

Look for a dot that stays black, white or one colour while the rest changes. Click, tap or press an arrow key for the next colour.

The colours, in order: black, white, red, green and blue.

Afterwards: did you see a dot that didn't change?

How to tell a dead pixel from a stuck one

A dead pixel gets no power. It stays black on every colour and is easiest to see on white.

A stuck pixel stays one colour, often red, green or blue, or stays lit. It is easiest to see on black.

Dust or a mark on the glass looks much the same, but it moves or goes when you wipe the screen. A faulty pixel stays exactly where it is.

How this test decides

You decide this test, because only your eyes can see the screen. No, none after all 5 colours is Okay. Yes, one or more is Check this. No, none before every colour has been shown is also Check this, because a faulty pixel can hide on all but one colour.

This test runs in your browser. Nothing is stored or uploaded.

How to run the dead pixel test

This dead pixel test fills your whole screen with one flat colour at a time, so a pixel that isn’t doing what it’s told has nowhere to hide. The same five colours make it a stuck pixel test too. It takes about a minute, and your eyes do the judging.

  1. Press Start full screen. The screen turns black and a small label says which colour you’re on.
  2. Look over the whole screen a section at a time, corners and edges included.
  3. Click, tap, or press the right arrow key or the space bar for the next colour: white, then red, green and blue. The left arrow goes back one.
  4. Stepping on from blue brings you back to the page. You can leave at any point with Esc or the Leave full screen button.
  5. Answer the question under the test: did you see a dot that didn’t change?

If you leave the dead pixel test early, it counts the colours you saw. It won’t call the screen Okay until you’ve been through all five.

Before you start: clean the screen and turn the brightness up

Wipe the screen with a dry microfibre cloth first. A crumb or a speck of dust on white looks remarkably like a dead pixel, and a wipe saves you a false alarm. Turn the brightness up, keep direct sun off the screen and park the mouse pointer at an edge.

Then get close. A pixel on a 27-inch 4K monitor is about 0.16 mm across. From your chair, a single faulty one is easy to miss. About a hand’s width away is right, which makes a dead pixel check on a big monitor slower than you’d expect.

What to look for on each colour

Black is where stuck and hot pixels give themselves away. Any dot of red, green, blue or white on a black screen is lit when it shouldn’t be. White is the one for dead pixels, which show as a tiny black or very dark dot.

Red, green and blue each light only one of the three sub-pixels in every pixel, so they catch what the first two can miss. A pixel whose green sub-pixel is stuck on turns yellow on the red screen, because red and green light make yellow. A sub-pixel stuck off shows as a black dot on its own colour. That’s why the test asks for all five: as it says, a stuck pixel can hide on every colour but one.

The five test colours side by side: black with a green dot, white with a black dot, red with a yellow dot, green with a black dot and blue with a magenta dot.
Black shows dots that stay lit, white shows dots that stay dark, and red, green and blue show a single sub-pixel stuck on or off as a dot of the wrong colour.

What your result means

The answer comes from your reply and from how many colours you looked at full screen.

  • Okay: “No dead or stuck pixels seen”. You went through all five colours and answered No, none. If you were looking from your chair rather than up close, run it once more from a hand’s width away.
  • Check this: “You saw a dot that didn’t change”. You answered Yes, one or more. Wipe the screen and run the test again, because dust moves and a faulty pixel doesn’t. If the dot is still there, note where it is and which colours show it, then check your warranty or return period before you send anything. You also get Check this, as “Not every colour was checked”, if you answered before seeing all five colours.
  • Not working: this test never says it, because only you can see the screen. What would count is something bigger than a pixel: a line across the screen, a cluster of dots, or a patch that stays dark or flickers. That’s a panel or connection fault for the shop or the maker. If you answer Yes, the test shows Check this, and the advice holds: write it down and ask.
The dead pixel test: a preview of a screen filled with red with one black dot marked, the five colours in order, the question about a dot that didn’t change answered Yes, and the answer Check this.
Answer Yes, one or more and the test says Check this, with what to do next: wipe the screen, run it again, then check your warranty.

Dead pixel or stuck pixel: how to tell the difference

Every pixel on an LCD or OLED screen is three smaller sub-pixels, one red, one green and one blue. Light all three at full strength and you see white; switch them all off and you see black. Each sub-pixel has its own tiny transistor, and when one of those fails, the dot it controls gets stuck on or off.

A dead pixel stays off. It’s black on every colour and shows most clearly on white. A stuck pixel stays on, usually as red, green or blue because only one of its sub-pixels is stuck, and it shows most clearly on black. A hot pixel has all three sub-pixels stuck on and shows white on black. Makers usually say bright and dark instead, and count sub-pixels, so to them a green dot is one bright sub-pixel. The names get mixed up all the time, so when you report one, describe what you saw: “a green dot about a third of the way in from the left, visible on black, red and blue”.

Three enlarged patches of screen, pixels drawn as red, green and blue sub-pixels: a dead pixel, all three dark on white; a stuck pixel, only green lit on black; a hot pixel, all three lit on black.
A dead pixel has all three sub-pixels off. A stuck pixel has one stuck on, so it shows as a coloured dot. A hot pixel has all three on and shows as white on black.

Is it a pixel or a speck of dust?

Apple’s own article on pixel anomalies warns that a small piece of dust can look like one. Shape and behaviour give it away. A faulty pixel is a tiny, sharp square that sits exactly on the grid and never moves. Dust is irregular and it shifts or disappears when you wipe the screen with a lint-free cloth. Look at it from a slight angle, too: something on the glass seems to float above the picture.

Now and then dust gets between the screen’s layers. It won’t wipe off, but it still won’t look like a crisp square on the grid. Apple says only a service provider should remove it.

Two drawings of a white screen. Before wiping, there is an irregular grey speck and a small black square pixel, ringed. After wiping, the speck has gone and only the ringed pixel remains.
Dust is irregular and wipes away. A faulty pixel is a sharp square that stays exactly where it is.

Checking a monitor, a laptop or a phone

Monitors and laptops

Run this monitor pixel test the day a new screen arrives, before the packaging goes out. Set it to its recommended resolution and look at each colour up close. If you have two screens, the test fills the one the browser window is on. Drag the window across and run it again for the other.

On a laptop, plug in so the screen doesn’t dim halfway through and turn off automatic brightness for the minute the dead pixel test takes.

Two other checks belong in the same few minutes: check the screen for banding and uneven colour, and check your monitor’s refresh rate.

Phones, tablets and OLED screens

On a phone or tablet, tap Start full screen, then tap for each colour. Safari on an iPhone doesn’t let a web page fill the whole screen. Instead, the colour covers the page and the test tells you so. Turn the phone sideways and hide the toolbars to see as much as you can. You haven’t checked whatever a toolbar covers. For the very top and bottom edges, open a plain black or white picture full screen in your photos app.

Many phones, TVs and some monitors use OLED, where each pixel makes its own light and black is truly black, so a stuck one stands out sharply. OLED has a problem of its own, burn-in, covered in the questions below. When you’re checking a second-hand phone, test the touch screen too while it’s in your hand.

How many dead pixels are acceptable?

There’s no single number. Each maker decides how many faulty pixels a panel may have before it counts as a defect, and a screen with one dark dot can be “within specification”. What follows is from each maker’s own page as of November 2026; policies change, so check the one for your model and region.

Dead pixel policies from Dell, BenQ, Apple and LG

Dell’s Display Pixel Guidelines are the most detailed. Many of its monitors, including UltraSharp, the G series and most Alienware models, come with what Dell calls Premium Panel Exchange. Under it, if you see even one bright pixel during the warranty, Dell replaces the display. Dell treats dark sub-pixels differently, allowing up to five on those monitors. Lines without the guarantee allow more: the Dell Pro E series, for example, accepts up to five faulty sub-pixels, bright or dark, in total. Dell laptops at 1600 × 900 or higher allow no bright pixels and up to five dark sub-pixels.

BenQ’s monitor pixel policy divides the screen into nine equal rectangles. A monitor qualifies for repair with five or more defective sub-pixels anywhere, or with just one in the centre rectangle. Some BenQ models also carry a Zero Bright Dot guarantee, under which a single bright sub-pixel is enough for an exchange during the warranty. BenQ notes that its rules can vary by region.

A screen outline divided into nine equal rectangles by dashed lines, with the centre rectangle shaded and outlined in blue and a single dark pixel inside it.
BenQ’s policy splits the screen into nine equal parts and treats one faulty sub-pixel in the centre part as enough for repair. Other makers set their own rules.

Apple’s article About LCD display pixel anomalies gives no number at all. It says anomalies can occur in a small percentage of panels and asks you to have the display examined at an Apple Store or an authorised service provider. LG’s LCD monitor pixel policy, published by LG Canada, says bright and dark sub-pixels aren’t a defect unless their number goes over the limits in its table; it’s an older document, so ask LG which figures apply to your model. We couldn’t find a monitor pixel policy on Samsung’s UK or US support sites, so ask Samsung support in the country where you bought yours.

Should you return a new monitor with one dead pixel?

If you’re still inside the shop’s return period, that’s usually the simpler route. The maker only replaces a screen whose fault meets its policy, while the shop’s terms may take it back regardless. Read them first, as some treat an opened monitor differently.

Whether it’s worth it is your call. Plenty of people stop noticing one dark sub-pixel near a corner within a week; a bright green dot in the middle is harder to live with. If it will bother you, act while the return window is open.

Before you contact anyone, write down where the dot is (measured from two edges, or “middle of the top third”), whether it’s lit or dark, and which of the five colours show it. A photo helps: BenQ asks for one of the whole screen with the spot marked and one close up. Ask whether it qualifies before you post the screen anywhere. Our guide to dead or stuck pixels: what to do and when to return a monitor goes through it step by step.

Can a dead or stuck pixel be fixed?

Neither you nor any software can bring a dead pixel back. Dell’s guidelines say plainly that the only remedy is a new panel.

A stuck pixel is less certain. Owners report that some clear by themselves after hours or days, though no maker confirms it; others never do. People try leaving the screen off for a while, running a tool that flashes colours rapidly over the spot, or pressing gently on it through a soft cloth. None of these is proven. Dell’s guidelines name pixel-fixing software and pressing on the screen, and strongly recommend against both. The guidelines say both can damage the display and may void the warranty. Rapidly flashing colours can also trigger seizures in people with photosensitive epilepsy.

What causes dead pixels, and do they spread?

Most faulty pixels start at the factory. Apple and BenQ both put it down to a transistor that doesn’t work as it should. A modern panel has millions of them: a 4K screen has about 8.3 million pixels and nearly 25 million sub-pixels. A few fail on the production line or soon after; a knock, a drop or pressure on the screen can damage more later.

A dead pixel doesn’t spread to its neighbours, since each sub-pixel has its own switch. New faults can still appear during a screen’s life. That’s one reason the better policies cover the whole warranty rather than the first few weeks. Several new dots in a short time, or a line, is more than a pixel fault: report it while the screen is under warranty.

What a dead pixel test in the browser can and can’t tell you

The dead pixel test fills the screen with exact colours, pure black, white, red, green and blue, straight from your browser. It can’t see the screen, so it can’t spot a pixel, count them or tell dust from a fault. You’re the judge, and the answer comes from what you tell it.

It also doesn’t know your screen’s make, model or serial number, so the result isn’t proof about a particular screen. Nothing is stored or uploaded: your browser draws the colours and your answer stays on this page, as our privacy page explains.

Questions people ask

Can a dead pixel be white, red or green?

Strictly, no. A dead pixel is off, so it’s black. A dot that stays white, red, green or blue is a stuck pixel, and a white one is often called a hot or bright pixel. Makers’ policies count both kinds, usually as bright and dark sub-pixels.

Is a dead pixel covered by warranty?

Sometimes. It depends on the maker’s pixel policy for your model: Dell replaces many monitors for a single bright pixel, while others act only above a set number or for a fault in the centre. Ask before you send the screen anywhere.

Is it a dead pixel or burn-in?

A faulty pixel is a single dot. Burn-in, mostly seen on OLED screens, is a faint ghost of something that sat on screen for a long time, such as a taskbar, a channel logo or a keyboard, and it has that thing’s shape. It shows best on an even mid grey, which the Even grey pattern in our screen colour test gives you.

Does the dead pixel test work on an OLED screen, an iPhone or a TV?

Yes on OLED, where faulty pixels are especially easy to see on black. On an iPhone the colours cover the page rather than the whole screen, so hide the toolbars and turn it sideways. A smart TV’s own browser may or may not run it; where it can’t go full screen, the test covers the page instead.

Does this test fix stuck pixels?

No. It shows steady colours so you can find a fault and describe it. The flashing tools sold as fixers are unproven, and Dell warns that such methods can damage a display and may void the warranty.

Do dead pixels affect trade-in or resale value?

They can, since a bright dot is easy for a buyer to see. Run the dead pixel test before you list a device, so you can describe the screen honestly.

How common are dead pixels on new monitors?

No maker publishes a rate. Apple says pixel anomalies occur in a small percentage of panels, and the fact that every maker has a pixel policy tells you they happen often enough to plan for. Check within the return period, not months later.

Is anything recorded or uploaded?

No. Your browser draws the colours and only this page uses your answer. Nothing is stored or uploaded.