- Screen resolution
- …
- Pixel ratio
- …
- This window
- …
Your browser fills these in as the page loads.
What a browser can and can't tell
A browser knows the size your system draws the screen at, not the panel itself. With display scaling on Windows or a scaled resolution on a Mac, the panel's own resolution can be different. Your display settings show it.
Zooming this page in or out changes the pixel ratio and window size the browser reports. Reset the zoom to see the usual figures.
On a phone or tablet, turning it sideways swaps the two numbers.
A browser can't tell the screen's size in inches, its make or model, or how accurate its colours are.
Smooth shading from black to white, eleven grey steps, and smooth shading from black to red, green and blue.
Do the smooth bars show stripes or steps?
The grey row is meant to be in steps. Look at the smooth bars only.
How this test decides
You decide this test by eye. Smooth bars are Okay; stripes or steps in the smooth bars are Check this. Very faint, even steps are normal on many screens: look for wide bands you can see clearly. This is a comparison made in your browser, not a colour measurement. Checking colour accuracy needs a measuring device called a colorimeter.
This test runs in your browser. Nothing is stored or uploaded.
How to use this monitor test
This screen test puts three sets of patterns on your display and shows the resolution your system reports, all in the browser with nothing to install. As a monitor test it answers one question: does colour come out smooth and even, or does it break into stripes and blotches?
- Pick a pattern with the Gradients, Colour bars and Even grey buttons. It shows in the page straight away.
- Press Full screen to see it bigger. Click, tap or press the right arrow key for the next pattern, and Esc or Leave full screen to come back. The label fades after a few seconds.
- Answer the question under the patterns: do the smooth bars show stripes or steps?
Before you look, reset the browser zoom to 100% and turn the brightness up to where you normally use it. Also switch off night light or any blue-light filter, so you’re judging the screen, not a filter on top of it. Sit straight in front of it.
Gradients: look for stripes
The first pattern is smooth shading from black to white, a row of eleven grey steps, and smooth shading from black to red, green and blue. The smooth bars should flow without visible edges. The grey row is meant to be in steps: it lets you check you can tell every step apart, the darkest ones included. If the first two or three steps from black merge into one, the screen is hiding shadow detail. In that case, the brightness or black level setting in the monitor’s own menu usually brings them back.

Colour bars: look for clean, even colour
This monitor color test shows eight bars: white, yellow, cyan, green, magenta, red, blue and black. Each should look clean and evenly coloured from top to bottom. Watch the white bar for a tint, pink or green, and move your head up and down. On some panels colours shift with the viewing angle, which is a trait of the panel type rather than a fault.
Even grey: look for darker corners or clouds
The last pattern is a flat mid grey, which makes this a quick screen uniformity test. Look for darker corners, brighter patches or a cloudy look, and on an OLED screen for faint shapes left behind by burn-in. It shows most in a dim room. A little unevenness is normal on most LCD monitors; a patch you notice in everyday use is worth raising with the seller.

What is colour banding, and is yours a fault?
Banding is when a gradient that should be smooth breaks into visible stripes. A screen fed 8 bits per colour can show 256 levels from dark to full brightness. So a black to white gradient across a 2560-pixel-wide screen is drawn in steps about ten pixels wide. On many screens you can just make out very faint, even steps, and that’s normal. Banding worth acting on is wide bands you see clearly, bands of uneven width, or a grey gradient with pink or green stripes in it.

Settings that cause banding, and how to check each one
Banding most often comes from a setting rather than a fault, so work through these in order and look again after each:
- Resolution and colour depth. In Windows 11, open Settings, then System, Display, and choose the resolution marked Recommended. The Advanced display page shows the bit depth Windows is sending; your graphics driver’s control panel may let you raise it. On a Mac, open System Settings, then Displays.
- Night light, blue-light filters and colour modes. They squeeze some colours into fewer levels, which shows up as steps. Turn them off while you test.
- The monitor’s own picture settings. Vivid, dynamic contrast and some game modes stretch the image and can turn faint steps into hard edges. Reset the monitor to its standard mode from its menu.
- The cable and port. An adapter or an older cable that can’t carry the full signal may leave the computer sending fewer colours. Try another cable, or another port on both ends.
When banding is the picture, not the screen
If this monitor test’s gradients look smooth but a film’s dark sky or a game’s fog shows bands, the banding is almost certainly in the picture itself. Streamed video and many images are compressed, and compression is hard on gentle gradients. Your browser draws the patterns here at full quality, so they’re a fairer check of the screen than anything you’re watching.
When banding means the screen itself
If the stripes are still there after the settings above, look at a gradient in another app, then connect another computer or a console. Banding that follows the screen through all of that points at the screen. Inside a return period, that’s the time to ask the seller.
What is my screen resolution?
It’s the figure at the top of the test, labelled Screen resolution. It’s the number of pixels your system draws the screen at. The test works it out from what your browser reports: its own size for the screen, multiplied by the pixel ratio. The panel itself may have a different number, for reasons below. If you’re asking “what are my screen dimensions” in pixels, that’s the answer; a browser can’t tell the size in inches.
Why your 4K screen may show a smaller number
Windows and macOS scale the desktop so text isn’t microscopic on a sharp screen, and browsers report sizes in scaled units. A 4K monitor at 3840 × 2160 with Windows scaling at 150% tells a web page it is 2560 × 1440, with a pixel ratio of 1.5. Many resolution sites stop there, which is why people think their 4K screen is running at 1440p. But this monitor test multiplies the two back together and shows 3840 × 2160. The line under the figures says exactly what the browser reported.

A Mac with a Retina screen works a little differently. Choose a scaled size in System Settings, then Displays, and the Mac draws the desktop at twice that size, then fits it to the panel. A laptop with a 2560 × 1600 panel set to look like 1680 × 1050 draws 3360 × 2100. So that’s what the test shows, even though the panel has fewer pixels. And if a screen is set below its recommended resolution, you see the lower figure, because that’s what the system is drawing.
What the pixel ratio means
The pixel ratio, which browsers call the device pixel ratio, is how many of the screen’s pixels make up one of the browser’s own pixels. It’s 1 on a typical 1080p monitor at 100%, 1.25 or 1.5 with Windows scaling, and 2 or 3 on Retina Macs and most phones. Zooming the page in or out changes it, and changes the window size the test reports. That’s why it’s worth resetting the zoom first. This window, the third figure, is the part of the screen this page has to draw in.
How to check your resolution in Windows 11, macOS and on a phone
In Windows 11, open Start, then Settings, System and Display. Microsoft’s guide explains that the resolution marked Recommended is usually the best choice, and the Scale setting is in the same Scale & layout section. With more than one display connected, select the one you want first.
On a Mac, open the Apple menu, then System Settings, and Displays. Apple’s guide shows how to hover over each size to see it, and how to turn on Show all resolutions for a connected display.
Phones rarely show their resolution in the settings. Instead, the maker’s specification page lists the panel’s own figure, and this test shows what the browser reports. Turning a phone sideways swaps the two numbers.
What your monitor test result means
- Okay: “No banding seen”. You answered No, smooth: your screen and its settings show shades of colour evenly. It doesn’t measure how accurate the colours are; that needs a measuring device.
- Check this: “Your screen shows stripes where the colour should be smooth”. You answered Yes, stripes. Work through the settings above, from resolution and colour depth to the cable, and look again after each. If the stripes stay in other apps and on another computer, the screen itself may be at fault.
- Not working: this test never says it, because you judge the screen by eye. What would count is a screen that can’t show the patterns properly at all: a colour missing from the bars, lines through the picture, flicker or a dead area. If you see that, answer Yes, stripes. The test then shows Check this. Its steps, another cable and another computer, are the ones that tell a faulty screen from a faulty connection.
How to test a used or new monitor
Five minutes before you hand over money, or before the return period ends, covers the things that are hard to fix later:
- Set the recommended resolution, then go through all three patterns here, the even grey in a dim room.
- Run the test for dead or stuck pixels up close.
- Check the refresh rate if the monitor is sold as 120 Hz or faster.
- Try every input you plan to use, with the cable you’ll use, and press every button on the monitor.
For a second-hand OLED monitor, spend longer on the even grey, because burn-in shows there as the faint shape of a taskbar or a game’s on-screen display.
What a monitor test in the browser can and can’t tell you
A browser knows the size your system draws the screen at and the pixel ratio. But it doesn’t know the screen’s size in inches, its make or model, or how accurate its colours are. Nor can it tell what colour depth actually reaches the panel. With display scaling or a scaled resolution, the panel’s own resolution can differ from what’s shown; your display settings have the final word.
The banding answer comes from your eyes: this is a comparison made in your browser, not a colour measurement. Nothing is stored or uploaded, as our privacy page explains.
Questions people ask about the monitor test
Is my monitor colour-accurate?
A browser test can’t say. Checking colour accuracy needs a measuring device called a colorimeter, which sits on the screen and reads the colours it shows. What this test can tell you is whether shades come out smooth and even.
Can I calibrate my monitor without a colorimeter?
Partly, by eye. Windows has a built-in Calibrate display tool, found through Color Management in Control Panel, which walks you through gamma, brightness and colour balance. A Mac has a Display Calibrator Assistant, opened from the Color profile menu in System Settings, then Displays. Neither makes the colours measurably accurate.
Is my monitor 4K, 1440p or 1080p?
Look at the Screen resolution figure here at 100% zoom: 3840 × 2160 is 4K, 2560 × 1440 is 1440p and 1920 × 1080 is 1080p. If it shows less than you expected, check the resolution marked Recommended in your display settings, which is usually the panel’s own.
Why do the numbers change when I zoom the page?
Browser zoom changes the pixel ratio and window size the browser reports. Reset the zoom to 100% to see the usual figures.
Why does the grey row have steps?
It’s meant to. The eleven steps let you check you can tell every shade apart, the darkest included. Judge the smooth bars only when you answer the question.
Does it work on a phone or a TV?
Yes on a phone or tablet: the figures, the patterns and full screen all work, except that an iPhone shows the patterns over the page rather than the whole screen. A smart TV’s browser may run it. On a phone, you can test a touch screen as well.
Can a browser tell my monitor’s make, model or size in inches?
No. Browsers share none of those with web pages. The model is on a label on the back of the monitor and usually in its menu.
How do I test my second monitor?
Drag this window onto the other screen and reload the page, so it reads the figures there. Full screen opens on whichever screen the window is on.