Skip to the content

Webcam test

Free webcam test: see your camera live, its picture size and frame rate, and whether the picture is too dark. Nothing is stored or uploaded.

  • Nothing is stored or uploaded
  • Free, no sign-up, nothing to install
  • Chrome, Edge, Firefox and Safari

Check your webcam

See your camera's live picture, its size and its frame rate, and find out whether the picture is bright enough.

Your browser will ask first. The page needs it to show your picture; the picture stays on this device.

What happens next

Your browser shows its own question near the address bar. Choose Allow.

This test runs in your browser. The picture, and any still you take, stay on this device. Nothing is stored or uploaded.

This webcam test shows your camera’s live picture and tells you plainly whether it’s good enough for a call. It works as a camera test for a laptop’s built-in webcam or a USB one: you see the picture size the camera sends, its frame rate as measured in your browser, and an answer if the picture is too dark to see you. Nothing to install, no account.

How to test your webcam

To test your webcam, sit where you’ll sit for the call, with the light you’ll have then. A camera that looks fine at noon can turn you into a silhouette at five o’clock, so test at the time it matters if you can.

Allow the camera when your browser asks

Press Allow the camera, and choose Allow when your browser shows its own question near the address bar. The page asks for the camera only, never the microphone at the same time. Most cameras have a small light that comes on as soon as the picture starts; on a Mac, a green light beside the camera shows it’s on.

Look at the live picture

Your picture appears with a badge saying it’s live on this device only. Check your whole face is in the frame, with a little space above your head, and that you’re lit from the front. If you have more than one camera, the test lists them beside the picture: choose the one you’ll use and the test starts again with it.

Read the size, the frame rate and the answer

Beside the picture you’ll see the picture size, such as 1280 × 720, and the frame rate. The test gives the camera two seconds to adjust to the light, then reads the brightness and gives its answer. You can also press Mirror to see yourself the way others will, and Take a still to keep a snapshot of how you look.

The webcam test’s readings: picture size 1280 × 720 and a measured frame rate of 30 fps, the Mirror and Take a still buttons, and the answer Okay: your camera is working.
The two numbers to read: the picture size your camera sends and the frame rate measured in your browser.

Is my camera working? What each answer means

A webcam check here ends in Okay, Check this or Not working, in one plain sentence, so you don’t have to judge a row of numbers.

  • Okay: “Your camera is working”. It’s sending a picture bright enough to see you, and the answer gives its size and its frame rate as measured in this browser.
  • Check this: “Your camera works, but the picture is dark”, or “Your camera is on, but the picture is black”. The camera is fine; the light or something over the lens isn’t. The answer says what to change.
  • Not working: “Your camera is connected but sends no picture”, or the browser couldn’t use the camera at all: it’s blocked by the browser or your system settings, none was found, it couldn’t be started because another app may be using it, or it was disconnected. Each comes with what to do next.

“Works, but the picture is dark”

Why is my webcam so dark? Nearly always because the light is behind you or above you rather than in front. The test averages the brightness of the whole picture, twice a second over two seconds so a passing hand doesn’t change the answer. Below 20% of full brightness, a call app shows you as a dark shape, and the test says so with the figure it measured. Face a window or put a lamp behind your screen, pointing at you, and the answer changes as the picture brightens.

Two drawn webcam pictures of the same person: on the left, lit from the front with the face clearly visible; on the right, a dark silhouette against a bright window.
The camera sets its exposure for the brightest part of the picture. With a window behind you, that’s the window, and you become a silhouette.

“On, but the picture is black”

Why is my camera black when it’s clearly on? Below 3% average brightness the picture is nearly black, which no normal room produces. It means something is over the lens: a privacy shutter slid closed, a cover, a sticker, a finger. Many laptops also have a key or a switch that turns the camera off. Open the shutter, check the lens, and look along the top row of the keyboard for a camera symbol.

“Connected but sends no picture”

If no new picture arrives for 5 seconds, the test calls the camera stuck. This is the answer behind “why does my webcam keep freezing”: the browser opened the camera, but frames stopped coming. Close other apps that use the camera, then press Try again. If it still shows nothing, unplug it and plug it back in, try a different USB port, or restart the computer.

A brightness scale from black to white with two marks: below 3% the picture is called black, from 3% to 20% dark, and above 20% bright enough.
The test averages the brightness of the whole picture. Below 20% you’re likely to look like a dark shape on a call; below 3% something is covering the lens.

Picture size and frame rate, explained

The picture size is the number of pixels across and down in each frame the camera sends. 1280 × 720 is what’s often sold as 720p HD, and 1920 × 1080 as 1080p Full HD. The test asks the camera for up to 1920 × 1080 and shows the size it actually delivers, so a camera sold as 4K will show 1920 × 1080 at most here. That’s the test’s ceiling, not the camera’s.

Don’t worry if your camera shows less than its box promised. Some cameras only send their biggest size at a lower frame rate, or only over a faster USB port. And most call apps send a smaller picture than this anyway, depending on your connection and how many people are on the call. For a normal call, 1280 × 720 is plenty.

Three nested rectangles drawn to scale: 640 by 480 inside 1280 by 720 inside 1920 by 1080.
The sizes you’re most likely to see. 640 × 480 is an older, squarer shape; most webcams today send 1280 × 720 or 1920 × 1080.

The frame rate is how many new pictures arrive each second. The test counts them over 3 seconds as they reach this browser, so it’s a comparison, not a lab measurement of the camera. Where a browser can’t count frames, the test shows the rate the camera reports instead, and labels it that way. Around 30 frames a second looks smooth; 15 looks a bit jerky.

Measured rates are often lower than the box says, and there’s usually a plain reason. In dim light, many webcams slow down on purpose to let more light into each frame, so turning a lamp on can lift the rate. A camera sharing a busy USB hub, or a computer working hard on something else, can drop frames too.

Why your picture is mirrored, and how others see you

The test starts with the picture mirrored, like a bathroom mirror, because that’s what feels natural when you look at yourself: raise your right hand and the hand on the right side of the screen goes up. The people on your call see the camera’s real view, the other way round. Any writing behind you looks backwards in your preview and reads correctly for them.

Press Mirror to turn it off and see what they see. That’s worth doing once if you’ve arranged a shelf or a sign behind you. Call apps do the same: Microsoft says Teams’ Mirror my video setting only changes the view for you, and Google’s help for Meet says your self view is mirrored while other people see the correct way round. So a mirrored preview isn’t a fault, and you don’t need to fix it. When you save a still, it comes out the way it appears, mirrored or not.

Two drawn webcam pictures of a person raising one hand beside a wall sign with an arrow. In the mirrored one the hand and the arrow are on the opposite sides to the unmirrored one.
Left, your preview, mirrored like a bathroom mirror. Right, the camera’s real view, which is what others see. Turn Mirror off to check it.

Getting the light right for a call

Light in front of you does more for how you look on a call than any camera upgrade. Sit facing a window if you can, or put a lamp behind your screen pointing at your face. A ceiling light directly above you leaves your eyes in shadow, and a window behind you turns you into a silhouette however good the camera is.

Raise the camera to eye level too: a laptop on a stack of books stops the view up your nose. If the picture is still dim after all that, Windows 11 has brightness and contrast controls for many cameras in Settings, then Bluetooth & devices, then Cameras, where you choose your camera from the list. Which controls you get depends on the camera.

Built-in laptop camera or USB webcam

A webcam test for a laptop works the same as for a plug-in camera, but with two cameras connected, the browser and each call app may pick different ones. Choose the one you mean in the list and check the picture is the view you expect. External webcams usually sit higher and give a straighter view; built-in ones are handier but lower.

Many laptops now have a sliding privacy shutter over the lens, and some have a camera key on the keyboard. A closed shutter gives a black picture with the camera still on, and a camera key can do the same or make the camera disappear from the list, so check both first if the answer says black or no camera is found. If you use a stick-on cover on a MacBook, Apple warns that closing the lid with a camera cover in place can damage the display.

Testing your camera before Teams, Zoom or Google Meet

If this test shows your picture, the camera, its connection and your system’s camera settings are all working. Call apps choose their own camera, so if people can’t see you in one, look at the app’s video settings next.

It works here but not in Teams

In the Teams desktop app, select the three dots next to your profile picture, then Settings, then Devices, and choose your camera from the Camera list under Video settings. If Teams says your camera is in use by another program, close other apps that use the camera, including other browser tabs with a call open. People who have trouble with the camera in Teams often hit the microphone not working in Teams as well; that guide covers it.

Zoom

In the Zoom desktop app, click your profile picture, then Settings, then Video & effects. The preview shows the camera Zoom has chosen, and you can switch to another there. During a meeting, click the arrow next to the Video button, then Video settings.

“Camera not found” in Google Meet

Meet runs in your browser, so if this test works in the same browser, the camera is reachable. Before you join, the preview has a camera list where you can pick the right one. If Meet still says it can’t find a camera, see our guide to camera not found in Google Meet.

Checking your camera before an online exam

A webcam test for an online exam or a proctored exam is a good idea the day before, not five minutes before. This test tells you the camera works, the picture is bright enough and it’s the camera you expect. The exam’s own system check still decides whether you can sit the exam, since it may need a particular browser or extension, so run that too.

Why your webcam isn’t working

Another app is holding it. Many cameras can be used by only one app at a time. A call app left running, a camera utility or another tab can keep it, and the test says the camera couldn’t be started. Close them and press Try again.

Your system’s privacy settings. In Windows 11, open Settings, then Privacy & security, then Camera, and turn on Camera access, Let apps access your camera and Let desktop apps access your camera. On a Mac, open System Settings, then Privacy & Security, then Camera, turn your browser on, and quit and reopen the browser.

Your browser’s permission for this site. If you once chose Block, the test shows the steps for your browser. Our guide shows how to allow the camera in Chrome, Edge, Firefox or Safari.

The cable, the port or the driver. If no camera is found at all, try another USB port, preferably one on the computer rather than a hub. On Windows, check the camera appears in Settings, then Bluetooth & devices, then Cameras. If it doesn’t appear there either, the system can’t see it, and no browser will.

What a browser webcam test can and can’t tell you

It can tell you the camera starts, keeps sending pictures, what size they are, roughly how many arrive each second, and whether the picture is bright enough. That’s what decides whether people can see you on a call.

It doesn’t give the camera a quality score, and it doesn’t measure sharpness, colour accuracy or grain. It can’t show sizes above 1920 × 1080, because it doesn’t ask for them. Its frame rate is a comparison made in this browser, not the camera’s specification. It can’t tell you whether your camera has been hacked, either; it only knows what the camera sends while this page is open.

Your privacy

This online webcam test runs entirely in your browser. Nothing is stored or uploaded. The picture goes from your camera to the page and no further. A still you take stays in the page until you save it or delete it; saving puts it in your downloads as a file on your own device. When you leave the page, the camera is switched off and anything left in the page is gone. Read more about how the tests handle your data.

Want to hear yourself too? Run the mic test, or test your webcam and mic together before a call, with your speaker as well.

Questions

Is my camera on right now?

While the test shows your picture, yes, and most cameras show a light. When you leave or close the page, the test stops the camera and the light goes out. If the light stays on after you close every app, something else is using it.

Is it safe to use a webcam test website?

It depends on the site, so read what it says it does with your picture. This one shows the picture in the page only. Nothing is stored or uploaded, and a still goes nowhere unless you save it to your own device.

Does the still I take get uploaded?

No. It stays in the page, below the picture, until you press Save the still or Delete the still. Saving puts a file called webcam-still.jpg in your downloads.

Why is my webcam blurry or grainy?

Grain usually means too little light: the camera boosts a dim picture and the noise comes with it. Blur is often a smudged lens, so wipe it gently with a soft cloth. This test doesn’t measure sharpness, but the live picture and a still let you see the difference as you change things.

Why is my webcam in black and white?

The test shows what the camera sends, so the setting is in the camera or its software, not the browser. Look for a colour or saturation setting in the camera maker’s app, or in Windows 11 under Settings, then Bluetooth & devices, then Cameras. Some cameras also switch to black and white in very low light.

How do I test my webcam on Windows 11 or a Mac without a website?

On Windows 11, open the Camera app from the Start menu. On a Mac, open Photo Booth or FaceTime. If the camera works there but not here, the browser’s permission is the likely cause.

How do I allow camera access in Chrome or Safari?

Choose Allow when the browser asks. If you blocked it before, the test shows the steps for your browser. In Chrome, select the icon at the left of the address bar, which Google calls View site information, and turn Camera on; in Safari on a Mac, open Website Settings from the Page menu at the left of the address field (in older versions, the Safari menu, then Settings for this website) and set Camera to Allow. The full steps are in our guide to allowing the camera and microphone.

Can I test my phone’s camera?

Yes, open this page in your phone’s browser and allow the camera. If the phone offers more than one camera in the list, choose the front one for calls.